Sent from supplier 4-8 day delivery
We are super excited to be expanding the popular Blackzon Smyter truck range with two more Smyter TURBOs!
What's the FIRST thing new RC drivers want? MORE SPEED! That's why the new Blackzon Smyter TURBO DT and DB are here - fitted with a powerful BRUSHLESS MOTOR system for extra power, performance and FUN!
SMYTER TURBO DB - Under the hood!
One of Blackzon's most popular kits gets even MORE speed, plus awesome LED lights fitted as standard!
With its roll cage housing the realistic driver and co-driver figures, gnarly beadlock effect treaded tires and fully functioning spare wheel and tire to get you out of a jam on those desert runs, The Smyter Desert Buggy is every bit as much fun to drive as you'd imagine.
4WD shaft drive Desert Buggy
3S-capable Brushless System
Adjustable Oil-Filled Coilover Shocks
4-Gear Steel Differentials Front & Rear
Metal Driveshafts & Hex Hubs Front & Rear
Independent double wishbone suspension
Gear cover to keep debris away from the spur gear
Dual Point Bell Crank Steering System
Servo Saver Built into Servo Horn
Complete Set of Ball Bearings
Splashproof Electronics
2.4GHz Radio with 2 in 1 ESC/Receiver
Li-Po 7.4V 1600mAh Battery w/ T-Plug connector
USB Charger included
LED Roof Light fitted to Body
Front LED Lights included in box (customer to fit if desired)
Speed Limiter using Speed Dial on Transmitter
3S Battery & Charger available as options soon
Top speed 2S: 45km/h (28mph)
Top speed 3S: 70km/h (43mph)
Specification:
Length: 395mm
Width: 255mm
Height:160mm
Wheelbase: 240mm
Wheel Diameter: 95mm
Wheel Width: 35mm
Items Required:
3 x AA Batteries for transmitter - HPI Recommends #101939 Plazma AA Batteries
Sent from supplier 4-8 day delivery
The Savage XL FLUX combines the awesome raw power of 6S LiPo brushless power with the stability of a long wheelbase in the legendary Savage HPI monster truck package! The colossally powerful FLUX 2200KV motor is ready for all the power you can run through it, and the FLUX 6S-capable electronic speed controller is fully capable of up to 22.2 volts of power to let you pull off giant stunts and jaw-dropping speed. The Savage XL FLUX is packed with options and ready to rock right out of the box!
Crazy as FLUX Speed and Power
Easy plug-and-go convenience is the hallmark of electric RC trucks, and the Savage XL FLUX is no different. Just plug in two matching battery packs and you are off and running! The Flux 6S-capable speed controller can handle massive amounts of power, and you can fit standard 2S or 3S LiPo batteries, or our extra-long #106397 2S and #107222 3S LiPo batteries designed just for the Savage FLUX line of trucks! Want to break the speed limit with your monster truck? With the Savage XL FLUX, it's super-easy! With 2 3S LiPo batteries and on-road tires like our #4729 or #4731 mounted Phaltlines you can hit 62 mph (100km/h) with the pull of a trigger!
Like all HPI trucks, the Savage XL FLUX is easy to drive with the included steering wheel controller - but it shouldn't be handled by beginners! We recommend the Savage XL FLUX be driven only by RC hobbyists with plenty of experience and good reactions! With a pair of 7.4 or 11.1 volt batteries installed, the Savage XL FLUX gets up to insane speeds VERY quickly! Expect to get mud, rocks and dirt slung at you when you pull the trigger!
Once you get used to the power of the FLUX 2200Kv motor, you'll be able to rip off huge stunts at your local skate park, achieve crazy fast top speeds in empty parking lots and throw up huge rooster tails of dirt! The power of the Savage XL FLUX cannot be denied!
After over a decade of thrilling serious RC bashing performance, the HPI Savage has earned a reputation for being the toughest monster truck you can find. A pair of XL-Long 2.5mm thick aluminum Twin Vertical Plates (TVP) provide the backbone of the Savage, and a thick 7075 aluminum motor plate holds the super-powerful FLUX 2200Kv motor in place. The XL-Wide Savage suspension is ultra-tough, with super-thick webbed suspension arms and uprights built to handle gigantic jumps, rough landings, rolls and full-speed crashes. Super heavy-duty, bulletproof drivetrain parts like thick steel dogbones, all-metal transmission gears, forged diff gears and metal diff cases make sure drivetrain can handle all the power of the XL-Powerful FLUX motor. Huge Big Bore dual-stage oil-filled shocks tame the roughest landings and terrain, giving you total control at all times! The Savage XL FLUX is simply the toughest electric monster truck you'll ever find!
Savage XL Design with Flux Power
The Savage XL FLUX is based on the already awesome long wheelbase and extra-wide Savage XL platform, featuring a low-mounted FLUX 2200KV motor in place of the big-block nitro engine, a powerful FLUX 6S-capable speedo in place of the fuel tank, and twin battery boxes hanging on the outside to hold a variety of battery types. Power your Savage XL FLUX with a pair of matching LiPo batteries equipped with 2S 7.4v or a whopping 3S 11.1v power! This truck is packed with HPI upgrades and options, including the 3.0mm TVP (Twin Vertical Plate) chassis, tough all-metal gear drivetrain, extra-powerful metal-gear servo, forged diff gears and legendary Savage suspension parts and shock towers for extreme durability! Big Bore shocks at each corner of the Savage XL FLUX take up the shock of big-air landings and give you excellent control and traction on any surface.
Please see our note below recommending LiPo batteries above 4000mAh and 30C to get the most out of the electronics in the Savage XL FLUX.
Features
Factory-assembled & pre-painted electric-powered 4WD 1/8 scale electric-powered monster truck
2.4GHz radio system
3.0mm TVP (Twin Vertical Plate) chassis with XL-long wheelbase
HPI high torque steering servo
HPI FLUX 6S-capable brushless ESC
HPI FLUX 2200KV brushless motor
6S LiPo capability
Big Bore silicone oil-filled shocks
All-metal bulletproof drivetrain
43-tooth steel spur gear
Super heavy-duty dogbones
Forged diff gears
17mm hex hubs
Shock towers have multiple shock mounting positions
Quick access to the front or rear differential by removing just 4 screws
Cam type servo saver
Twin vented battery boxes with locking battery box doors
Battery boxes fit specially designed HPI #106397 2S and #107222 3S batteries
All socket head hardware
Slipper clutch to protect drivetrain
Protected receiver box
3mm 7075 motor plate
Dual 8mm billet motor clamps
4-gear differentials
Aluminum front and rear suspension braces
Front and rear skid plate bumpers
Full set of ball bearings
Chrome Warlock wheels
WHAT YOU NEED:
2 matching LiPo batteries with Deans compatible T-Plugs
and at least 4000mAh capacity and 30C discharge
Sent from supplier 4-8 day delivery
The Jumpshot is a globally renowned RC fun-machine and the perfect way to get a quick fix of HPI RC excitement in gardens, dirt tracks and just about anywhere. So much so that leading tire brand Toyo Tires put this Jumpshot SC complete with special edition livery and 1/10th scale replicas Open Country M/T off road tires, center stage in a national TV ad campaign!
What's more this V2 version is packed with upgrades including the 12-turn 550-size motor with optimized gearing and a raft of durability improvements including new drivetrain gears, suspension parts and servo saver!
Due to popular demand, we're stoked to release this special
edition to the world as a Toyo Tires officially
licensed product!
With a brand new, super-powerful, 12-turn, 550-size motor, the Jumpshot V2 trucks have tons of power for more fun! The bigger size of motor gives you tons of extra torque for fast acceleration and maximum jumping power, and the 12-turn construction means you'll get extra-high RPM for superfast top speeds! Enhanced gearing from the new and improved pinion & spur gear combination means you get the best of both worlds: wild acceleration from a standing start, plus crazy fast top-end speed! And with the new T-plug battery plugs, you can easily fit in more powerful batteries for mind-blowing action!
Brand new materials and designs for several important parts mean you can bash and race all day long thanks to the new Differential - Composite main gear - Sealed 4-Bevel gear design using internal gears from the Sport3, SavageXS and Bullet. Plus, new metal idler gear, spur gears, reinforced camber link, new shielded spur gear cover, metal motor mount plus a stronger servo saver mean that the V2 really means something when it comes to the HPI Jumpshot trucks! You can drive all day and not worry about a thing, whether you're jumping, bashing, racing or just going crazy!
The new Jumpshot SC V2 features a brand new look that will definitely turn heads and get the attention of your friends at the local bashing spot! The officially licensed Toyo Tires livery really sets off the racing scheme and the racing numbers, stabilising wings, aggressive black wheels and chunky all-terrain official 1/10th Open Country M/T off road tires tires all add up to a look and style that can't be beat at any track or RC park!
The Jumpshot V2 line-up is loaded with features that will keep you driving for hours! In the middle of the Savage-style TVP chassis, the radio box is protected from the elements, and the steering features not just a sturdy direct-link steering system but also a water-resistant steering servo for extreme protection. A powerful rear-wheel 2WD drivetrain lets you kick out the rear end for extreme fun, on-road or off! The new 12-turn, 550-size motor with its waterproof, LiPo-ready speed controller and optimized gear ratio gives you great acceleration and top speed, and the new extra-durable gears are much stronger than the original design. A newly designed servo saver and stronger upper suspension links also make the front end and steering extra-rugged for driving over the rough stuff!
Like all HPI cars and trucks, a complete set of ball bearings lets you get the most out of every battery pack without losing any power from the brushed motor fitted at the back of the chassis. This means you can blast through any type of terrain you want, whether it's grass, mud, asphalt, gravel or anything else!
Factory-built Ready To Run 2WD short course truck
NEW! Metal Top & Middle Transmission Gears
NEW! Revised tooth profile for improved gear mesh and lower rolling resistance
NEW! Composite Differential - Sealed oil filled 4-Bevel gear design
NEW! Fully enclosed Spur Gear Cover with Rubber Cap to access slipper clutch
NEW! Rear Gear Box with Metal Motor Mount Plate Insert
Short Course truck style body with officially licensed Toyo Tires livery
1/10th scale replica Open Country M/T off road tires
Tough aluminum TVP chassis design
Battery box fits 6- or 7-cell NiMH flat style stick packs and 2S LiPo packs
Battery easily accessible from bottom of chassis
12-turn 550-size motor for maximum power
HPI SC-3SWP2 Waterproof LiPo-ready ESC fitted with high-power T-Plug
Enclosed receiver box
2.4 GHz radio system
Oil-filled shock absorbers
Double-wishbone suspension design
Sturdy body mounts
Standard 12mm hex hub wheel fitting
Black 8-spoke wheels
Sent from supplier 4-8 day delivery
The Jumpshot SC V2 is the short course version of the Jumpshot platform, with front and rear ‘basher’ bumpers ready for the rigors of off-road bashing, whilst the sleek short course body and all-terrain tires give it fantastic looks and great performance!
The V2 version is packed with features for maximum fun anywhere you drive it! For awesome speed, the 12-turn 550-size motor with optimized gearing is great for fast acceleration and high top speeds. A host of durability improvements include tough drivetrain gears, durable suspension parts and extra-tough servo saver!
Underneath the sleek racing body of the Jumpshot SC V2, the chassis is a Savage-style TVP (Twin Vertical Plate) design for a super-stiff chassis and center-balanced weight. The modular design of the chassis gives you simple maintenance and durable crash protection for all the electronics. The battery is quickly accessed from underneath the truck, so changing batteries is extra-fast for more driving fun!
Factory-built Ready To Run 2WD Short Course Truck
Tough aluminum TVP chassis design
Battery box fits 6- or 7-cell NiMH flat style stick packs and 2S LiPo packs
Battery easily accessible from bottom of chassis
12-turn 550-size motor for maximum power
HPI SC-3SWP2 Waterproof LiPo-ready ESC fitted with high-power T-Plug
2.4 GHz radio system
Enclosed receiver box
Metal Top & Middle Transmission Gears
Revised tooth profile for improved gear mesh and lower rolling resistance
Composite Differential - Sealed oil filled 4-Bevel gear design
Fully enclosed Spur Gear Cover with Rubber Cap to access slipper clutch
Rear Gear Box with Metal Motor Mount Plate Insert
Oil-filled shock absorbers
Double-wishbone suspension design
Sturdy body mounts
Standard 12mm hex hub wheel fitting
Black 8-spoke wheels
#160261 Jumpshot SC V2 - Green
1/10 2WD Electric short course Truck
Specifications:
Length: 560mm
Width: 295mm
Height: 190mm
Wheelbase: 335mm
Weight: 1.95kg
What you need:
4 AA batteries for transmitter - HPI Recommends #101939 Plazma AA batteries
6- or 7-cell NiMH flat style stick pack or 2S LiPo pack with T-plug - HPI Recommends #160160 2S LiPo
Battery charger for car battery - HPI Recommends:
#160239 (AUS)
Sent from supplier 4-8 day delivery
The Blackzon Slyder is perfect for getting a taste of RC jumping, performing stunts, bashing - and even crashing! The Blackzon trucks are all about simple charge-and-go fun and just keep coming back for more!
With its 4WD shaft drivetrain, independent double wishbone suspension, adjustable coilover shocks and 4-gear differentials both front and rear, the Slyder dominates any kind of terrain, both indoors and out, giving you all-out fun wherever you choose to drive! Plus, with its protective gear cover, servo saver and waterproof electronics - you don't need to worry about puddles or any kind of debris standing in your way!
Brushless motor system
Rear metal dogbones
4WD shaft drive Monster Truck or Stadium Truck
Independent double wishbone suspension
Adjustable Coilover Shocks
4-Gear Differentials Front & Rear
Gear cover to keep debris away from the spur gear
Dual Point Bell Crank Steering System
Servo Saver Built into Servo Horn
Complete Set of Ball Bearings
Waterproof Electronics
2.4GHz Radio with 2 in 1 ESC/Receiver
Li-Po 7.4V 1000mAh Battery w/ T-Plug connector
USB Charger included
Front LED Lights included in box (customer to fit if desired)
Speed Limiter using Speed Dial on Transmitter
Top speed 34km/h (21mph)
Specification:
Length: 270mm
Width: 215mm
Height: 130mm
Wheelbase:175mm
Items Required:
3 x AA Batteries for transmitter - HPI Recommends #101939 Plazma AA Batteries
Sent from supplier 4-8 day delivery
The Blackzon Slyder is perfect for getting a taste of RC jumping, performing stunts, bashing - and even crashing! The Blackzon trucks are all about simple charge-and-go fun and just keep coming back for more!
With its 4WD shaft drivetrain, independent double wishbone suspension, adjustable coilover shocks and 4-gear differentials both front and rear, the Slyder dominates any kind of terrain, both indoors and out, giving you all-out fun wherever you choose to drive! Plus, with its protective gear cover, servo saver and waterproof electronics - you don't need to worry about puddles or any kind of debris standing in your way!
Brushless motor system
Rear metal dogbones
4WD shaft drive Monster Truck or Stadium Truck
Independent double wishbone suspension
Adjustable Coilover Shocks
4-Gear Differentials Front & Rear
Gear cover to keep debris away from the spur gear
Dual Point Bell Crank Steering System
Servo Saver Built into Servo Horn
Complete Set of Ball Bearings
Waterproof Electronics
2.4GHz Radio with 2 in 1 ESC/Receiver
Li-Po 7.4V 1000mAh Battery w/ T-Plug connector
USB Charger included
Front LED Lights included in box (customer to fit if desired)
Speed Limiter using Speed Dial on Transmitter
Top speed 34km/h (21mph)
Specification:
Length: 270mm
Width: 215mm
Height: 130mm
Wheelbase:175mm
Items Required:
3 x AA Batteries for transmitter - HPI Recommends #101939 Plazma AA Batteries
Sent from supplier 4-8 day delivery
The Blackzon Slyder is perfect for getting a taste of RC jumping, performing stunts, bashing - and even crashing! The Blackzon trucks are all about simple charge-and-go fun and just keep coming back for more!
With its 4WD shaft drivetrain, independent double wishbone suspension, adjustable coilover shocks and 4-gear differentials both front and rear, the Slyder dominates any kind of terrain, both indoors and out, giving you all-out fun wherever you choose to drive! Plus, with its protective gear cover, servo saver and waterproof electronics - you don't need to worry about puddles or any kind of debris standing in your way!
Brushless motor system
Rear metal dogbones
4WD shaft drive Monster Truck or Stadium Truck
Independent double wishbone suspension
Adjustable Coilover Shocks
4-Gear Differentials Front & Rear
Gear cover to keep debris away from the spur gear
Dual Point Bell Crank Steering System
Servo Saver Built into Servo Horn
Complete Set of Ball Bearings
Waterproof Electronics
2.4GHz Radio with 2 in 1 ESC/Receiver
Li-Po 7.4V 1000mAh Battery w/ T-Plug connector
USB Charger included
Front LED Lights included in box (customer to fit if desired)
Speed Limiter using Speed Dial on Transmitter
Top speed 34km/h (21mph)
Specification:
Length: 270mm
Width: 215mm
Height: 130mm
Wheelbase:175mm
Items Required:
3 x AA Batteries for transmitter - HPI Recommends #101939 Plazma AA Batteries
Sent from supplier 4-8 day delivery
More performance and style with improvements to each key component, this machine is more than just a reproduction!
As the 5th model to make its return as part of the vintage series, the ever-popular Scorpion released in 1982 was relaunched 2 years ago and has undergone a detailed overhaul to match modern performance with retro styling. The new Turbo Scorpion remains true to the essence of the unique Scorpion design throughout, but features Scorpion-style wheels in the larger 2.2 inch modern standard wheels for improved off-road performance. In addition, 12mm oil shocks based on the Optima deliver rock-solid running stability and excellent damping characteristics that work in combination with high-grip front and rear tires with a 20mm wider front tread and 10mm longer wheelbase than the original Scorpion to realize improved control and handling performance. With a thorough modernization, the new Turbo Scorpion is ready and willing to accept modern-day power sources and compete on modern race circuits. The standard Turbo Scorpion is a fully optioned chassis configuration and is ready to take the punishment that goes with hard driving.
●Turbo Scorpion updated to meet the demands of the modern off-road racing scene.
●Kit includes pre-assembled gearbox.
●Features same racy-style mini bumper as the original.
●Rear section reinforced with Rear Sus Post L, strengthened by added flange.
●Features accurate recreation of the original loop-mount light buckets. Optional LED lights can be simply bolted on.
●Screwed surfaces are countersunk for flat finish.
●Decals included in kit are diecut. Stretch for easy application and beautiful body finish.
＜ Kit Contents ＞
●Pre-assembled kit (gear box is pre-assembled)
●Polycarbonate clear body
●Decals
●Chassis parts
●L type hexagonal wrench
●Cross wrench
●Shock wrench
●Shock oil
●Grease
＜ Required for operation ＞
●2ch 1 servo R/C system for cars
●540 class motor
●ESC compatible with motor used
●Battery for chassis compatible with ESC used
●Battery charger
●Paint for polycarbonate body
●Batteries for transmitter
●Tools (1.5, 2, 2.5mm hexagonal wrench driver)
Sent from supplier 4-8 day delivery
The ultimate revival! Get ready for the resurgence of Kyosho s famous Scorpion! In the spirit of the original but with upgrades throughout!
The legendary Kyosho Scorpion is credited with taking the racing buggy category into the realm of pure motorsports. Even after 30 years since it was first released in 1982, the indelible mark of the Scorpion still exists with its many fans around the world. Kyosho is proud to renew this machine to all its former glory! While maintaining the wild and free spirit of the original baja buggy style and chassis layout, the 2014 version features the latest in performance technology and sacrifices nothing in speed and endurance on modern buggy racing tracks. Externally it may look like the original Scorpion with its semi-trailing suspension arms, but the advanced 6061T6 forged aluminum material delivers futuristic levels of strength, rigidity and durability. Following the original design, the Scorpion 2014 features a new two-piece die-cast aluminum gearbox with differential gears. In addition, the included slipper clutch protects the transmission as well as delivers efficient traction that takes the Scorpion s control feel and durability to a new higher level. Precision 48 pitch gears reduce traction pulsation for direct driving control characteristics while the flat under surface of the countersunk chassis has no protruding screw heads for minimal contact resistance and scraping, resulting in higher durability. Stainless shafts combine with aluminum cylinders in the oil shocks for smooth stroke from top to bottom and running performance worthy of a true racing buggy. Like the original Scorpion, the 2014 version is packaged as an unassembled kit, but nearly all tapping screws and nuts have been replaced with the improved lightweight and security a hex screws. From expert racers who knew the magic of the original Scorpion to modern-day racers, discover for yourself why the Scorpion 2014 commands such respect!
●Revival of the famous Kyosho Scorpion. High performance upgrades are featured throughout the 2014 version.
●Kit with pre-assembled gearbox and oil shocks (to be installed).
●Countersunk surface allows screws to be seated flat.
●Lightweight design reduces use of nuts and tapping screws.
●Ball diff from Ultima RB can be installed as an optional upgrade.
Required for Operation:
●2-ch, 1-servo R/C system for cars
●540-class motor (30-27 turns recommended)
●ESC compatible with motor
●Battery pack for chassis
●Battery charger
●Paint for painting the polycarbonate body
●Batteries for R/C transmitter
●Tools (1.5, 2.0, 3.0mm hex wrench)
Sent from supplier 4-8 day delivery
There is no denying the impact the Maverick Quantum family has had on the world of RC bashing! In no time at all the Quantum FLUX trucks have earned a fantastic reputation with fans on a quest to push these vehicles harder, faster, higher and longer! Inspired by all the fun you guys are having - we’ve committed to keep developing and advancing these vehicles as fast as customers keep blasting them!!
The upgraded Maverick Quantum MT FLUX 80A is a rugged 4WD Shaft-Driven, monster truck with a high ground clearance chassis design and high ride height suspension set up for clambering over any terrain! With independent Double Wishbone Suspension, Oil Filled Adjustable Coilover Shocks and Tough Metal 4-Gear Differentials Front & Rear, no amount of dirt or jumps will stand in your way!
Pushing the boundries of quality and performance further than ever before seen with Maverick brand, the whole range of Quantum kits benefit from a new Molded Tub Chassis with Hex Pattern Reinforcement, oversized 2.8" wheel design and an adjustable wheelie bar fitted as standard.
The newly upgraded Quantum FLUX 80A kits come preloaded with the same great MM-3660-BL 3300KV Brushless Motor complete with 5.0mm Shaft powering a tough shaft drivetrain spinning all 4 wheels for awesome 4WD action. While there's a step up in power with the waterproof 80AMP FLX10-3S80 ESC ready to pump up to 80 amps of power to the motor for amazing stunts, colossal top speeds, and wheel-spinning sideways action!
The waterproof ESC, waterproof receiver, water-resistant servo, and covered spur gear mean the fun keeps coming and water or debris won't stand in your way!
We're proud to announce the fantastic Quantum range features the first two tires in our new TREDZ range. Fully bespoke with compound, profile and tread patterns that are designed and specified by HPI Racing. Wrapped in high quality, high grip rubber.
Tredz Tires by HPI Racing are also available to purchase to upgrade the look and performance of any RC vehicle with 12mm Hex Hub wheel fittings. Look out for more tires joining the Tredz family soon!
4WD shaft drive
HD Front Universal Drive Shafts & Rear Wheel Axle Shafts
Aluminum Hex Hubs
3300KV Brushless Motor with 5.0mm Shaft
Independent Double Wishbone Suspension
Oil Filled Adjustable Coilover Shocks
Pillow Ball Front & Rear Suspension Uprights
Adjustable Steel Turnbuckle Links
Tough Metal 4-Gear Differentials Front & Rear
Gear cover to keep debris away from the spur gear
Dual Point Bell Crank Steering System With Integrated Servo Saver
Molded Tub Chassis with Hex Pattern Reinforcement
High Ground Clearance Chassis Design
Enclosed Receiver Box Protects from the Elements
Complete Set of Ball Bearings
Adjustable Wheelie Bar Included
Oversized 2.8" Wheel Design
Standard 12mm Hex Hub Wheel Fitting
TREDZ High Grip Tires
2.4GHz Radio Set with Waterproof Receiver
80A Waterproof ESC and Water-Resistant Servo
3S LiPo Capable
Specification:
Length: 475mm
Width: 365mm
Height: 200mm
Wheelbase: 285mm
Weight: 2.10kg
Items Required:
4 x AA Batteries fot transmitter
2S or 3S LiPo pack with T-plug - HPI Recommends #160161 2S LiPo or #160163 3S LiPo
Sent from supplier 4-8 day delivery
The Venture is the ultimate adventure-ready scale RC trail truck, and now it's available in a build-it-yourself version, ready for you to completely customize into your ultimate off-road vehicle. Developed from the ground up to be the most advanced and driver-friendly scaler truck available, the Venture is the perfect trail companion for anyone from weekend ramblers to globe-trotting adventure heroes! Whether you're driving up a mountain, crossing rocky streams or just taking it on a trail drive, the Venture can handle it all.
To make the Venture the best in class scale truck, the chassis features a formed steel chassis that encloses a realistic front-motor position with an all metal-gear transmission and full-time 4WD drivetrain with a central transfer case, plus a scale suspension featuring dual stage, oil-filled, coil-over shocks and sturdy off-road axles with full-time locked differentials.
The build-it-yourself Venture SBK includes official HPI options such as rebuildable front universal driveshafts, aluminum lower links for confidence over rough terrain, 4-link rear for increased articulation and traction, plus hidden axle weights for increased stability with a lowered center of gravity (CG). As you assemble the kit from the fully detailed assembly instructions, you can modify the truck if you wish, or add extra options and accessories as you go.
The Venture Scale Builder Kit is supplied in kit form only, ready for your own choice of motor, servo, speed controller, wheels, tires, body, and bumpers, so YOU can instantly have the most customized truck possible. Are you looking for the pre-built and Ready To Run (RTR) version of the Venture? Check out the #118146 Matte Black, #116558 Gunmetal, or #117165 Sandstorm RTR Venture trucks!
Full-time 4WD 1/10 scale off-road truck kit - you build yourself!
Formed steel C-channel chassis rails
Front and rear bumper mounts to fit bumpers of your choice
Adjustable rock rail side sliders help the truck get over tough obstacles
Front-mount motor and transmission position for ultimate scale realism
Front weight bias improves climbing traction and provides more realistic driving
All-metal gear drivetrain for extreme durability
Central transfer case with slider driveshafts to front and rear differentials
Transfer case prevents motor stall for the best climbing action
Transfer case also straightens & lowers center driveshafts for more efficient power transfer
Axles feature small diff case or "pumpkin" size for best possible ground clearance
Aluminum differential pumpkin covers
Locked differentials for superb off-road climbing traction
12mm aluminum hex hubs to fit any available crawler wheels
Shock towers have multiple mounting positions to allow for wheelbase options
BTA (Behind The Axle) steering linkage for improved approach and departure angles
Panhard bar for scale looks and optimized geometry with zero bump steer
Zero Ackermann high steer knuckle design for improved obstacle clearance and tighter turning radius
3-link front triangulated suspension
4-link rear triangulated suspension
Oil-filled aluminum coil-over shock absorbers (63-90mm stroke)
Adjustable threaded shock bodies for quick ride height changes
Dual-stage shock springs
Aluminum lower link/shock mounts
Aluminum Panhard mounts
CMS (Chassis Mounted Servo) realistic steering setup
Adjustable body mounting to fit any style of off-road body (truck or SUV)
Fully braced rear body mounts
Full set of ball bearings
Protective case for receiver
Antenna mount
with #117365 FJ Cruiser body and #116852 & #116853 bumper Type 1 sets
Length: 527mm (20.7")
Width: 227mm (9")
Height: 238mm (9.4") with roof rack, 217mm (8.5") without (will vary depending on tire choice and suspension settings)
Wheelbase: 311mm (12.3")
Front overhang: 101mm (3.9")
Rear overhang: 135mm (5.3")
WEIGHT
Running weight: 2.4kg (5.3lbs) (approximate - will vary depending on your choice of electronics)
CAPABILITY
with #116852 & #116853 bumper Type 1 sets - will vary depending on your choice of bumpers
Break-over angle: 44.5 degrees
Approach angle: 55 deg
Departure angle: 45.5 deg
Max climb angle: 49 deg
Max tilt angle: 28 deg
Axle articulation: 30 deg
Ground clearance 68mm capable: (2.7")
Ground clearance at standard ride height 60mm: (2.4")
Axle ground clearance 32mm: (1.3")
GEARING
Drivetrain ratio: 7.6:1
Transmission gearing: 1.53:1
Axle gearing: 3.31:1
Transfer case gearing: 1.5:1
What you need to complete this kit:
Your choice of scale body - 12.3" (313mm) wheelbase fits perfectly, other wheelbases will require changing the links to suit
Front and rear bumpers to match your choice of body
Scale crawler tires and wheels (we suggest 1.9" wheels for the best fit)
Brushed or brushless motor (we suggest a high turn brushed motor or equivalent brushless motor)
Electronic speed control to suit your choice of motor
High torque standard size steering servo
Radio system with receiver
Battery for truck (with suitable plug for your speed controller)
Batteries for radio transmitter
Sent from supplier 4-8 day delivery
Introducing the Venture Wayfinder, an RC trail truck that embodies the spirit of exploration. The HPI Venture is your steadfast companion, ready to traverse mountains, streams and beyond. It's not just a vehicle, it's a trusted ally for your weekend jaunts or grand explorations!
The Venture combines a realistic front-motor position and formed steel C-channel chassis rails with a realistic suspension and drivetrain. The new Wayfinder body augments the Venture framework, resulting in a unique off-road experience we're proud to provide. The Wayfinder body is meticulously crafted and available in two distinctive color options - a glossy metallic Gunmetal and a vibrant metallic Orange. The design details extend beyond the primary coloring, featuring black accents that embellish the arch extenders and sills creating a striking contrast.
Clear windows provide a realistic look, adding an extra layer of authenticity to the model. With front and rear bumpers, mirrors, a functional roof rack, and a swing-away spare tire mount, the Venture provides an authentic trail experience.
Several Optional parts are now standard equipment. Including the Aluminum lower link set, Aluminum rear 4 link and Universal front driveshafts. The vehicle’s performance is further enhanced by authentically scaled oil-filled shock absorbers and full-time locked differentials, paired with realistically treaded tires, ensuring dependable handling in all off-road conditions.
Sent from supplier 4-8 day delivery
Introducing the HPI Racing Venture18 – your ultimate companion for off-road adventure and exploration. Like its bigger brother, the Venture18 combines a tough formed steel C-channel chassis with a realistic suspension and drivetrain. Despite its compact size, this truck is packed with impressive features, including a new all-metal 2-speed transmission, 4-link front and rear suspension, and universal telescopic counter-rotating driveshafts. With authentically scaled oil-filled shock absorbers and full-time locked differentials, the Venture18 offers dependable handling in all off-road conditions.
The Venture18 also marks the return of officially licensed Toyota products to the HPI Racing lineup. The meticulously crafted 1985 Toyota Hilux SR5 body features a clipless polycarbonate body, and it’s available in two striking color options – a Gloss Black and a vibrant Gloss Red with a bold stripe kit. The body is prepainted and also features clear windows, plus scale accents like Toyota emblems, front grill, door handles, wipers, functional mirrors, plus tube-style bumpers and rollbars for an impressive level of realism. The fitted LED light kit enhances the authenticity even further, giving the Venture18 that extra layer of detail that truly stands out!
The Venture18 is fully Ready-to-Run (RTR) and includes a 600mAh LiPo battery pack plus a convenient USB balance charger that allows you to charge up anywhere, you can take the Venture18 on your next adventure and experience the thrill of off-road exploration like never before. It’s more than just a toy – it’s a vehicle for freedom, fun, and the spirit of adventure.
Gear up, hit the trails, and let your adVenture begin!
Sent from supplier 4-8 day delivery
HPI-Racing is proud to introduce latest addition to the Sport 3 line-up: a stunning replica bodyshell of the iconic BMW 2002 Turbo! This legendary car from the 1970s is not just a symbol of automotive history, but a perfect fusion of style and performance, now brought to life in 1/10th scale!
The BMW 2002 Turbo, introduced in 1973, is one of the most revered sports cars of its time. The first-ever production turbo car for BMW and any European car maker, it combined power, precision, and a distinctive style that made it an instant classic. Powered by a 2.0-liter, turbocharged engine, the 2002 Turbo was the first production BMW to feature an exhaust turbocharger, delivering exhilarating performance as well as thrilling driving dynamics. Its bold, aggressive design and racing pedigree cemented its place as a true automotive icon.
Under the hood, the 1/10th scale version of the BMW 2002 Turbo is equipped with the HPI Racing Sport 3 touring car chassis! With a full-time shaft drive, fully sealed 4WD drivetrain, waterproof electronics, 2.4GHz radio gear, fully independent double wishbone suspension and adjustable oil-filled shocks it’s Ready to Rock in all conditions. It's got plenty of power for 4-wheel drifts and jaw-dropping speeds at the pull of a trigger!
This officially licensed, meticulously crafted body captures the spirit of the original, featuring its aggressive front end, distinctive side stripes, and iconic "Turbo" badge. It’s a perfect tribute to the car that defined the performance hatchback era, now brought to life for RC enthusiasts.
Whether you're a classic car enthusiast, an experienced RC hobbyist, or simply someone who enjoys the thrill of RC driving, the HPI Racing Sport 3 with the BMW 2002 Turbo bodyshell delivers.
Embrace the legacy and drive the legend - on and off the track.
Sent from supplier 4-8 day delivery
HPI large scale fans, we have heard you! The one and only original HPI Baja 5B is BACK and ready for you to build from the ground up! The HPI SBK collection of Self Build Kits grows with the addition of not just one, but TWO 1/5th scale HPI kits! Fans of electric off-road RC will be super excited to build their own brushless-powered 1/5th scale with the HPI Baja 5B FLUX Self Build Kit!
When the HPI Baja 5B buggy was first introduced, large scale RC was very expensive and quite difficult for the average RC hobbyist to experience. Using highly durable parts and innovative design features, HPI brought large scale off-road to new enthusiasts and ushered in a new, BIGGER era of RC!
Now, YOU can build and own the legend! Experience the thrill and excitement of building a car which ends up being over 80cm (nearly 32 inches) long and weighing nearly 10kg (over 21 lb)! Just install your own electronics as you build the Baja 5B FLUX and you'll be ready for any adventure that comes your way!
With extra-tough drivetrain parts taken straight from the gasoline-powered version such as the viscous torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the Baja 5B FLUX is ready for up to 8S of raw LiPo power, so you can see speeds of over 50 miles per hour!
The Baja 5B FLUX is also equipped with extra-big and super-tough suspension parts, featuring awesome HPI durability! With its expertly designed molded composite suspension plus extra-long adjustable HD shocks, and massive high impact nylon 3-piece beadlock wheels, the Baja 5B is ready for full-speed racing on any off-road circuit!
The 4mm thick 6061 aluminum monocoque chassis fits a huge battery box and has space for the BIGGEST brushless motors you can find for RC, and also features an adjustable motor mount. Precise steering is provided by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and a sleek FLUX-specific clear polycarbonate body is included in the SBK kit, ready for your custom racing scheme!
The Baja 5B FLUX SBK is a great addition to your HPI collection, as well as a fabulous introduction to large scale buggies!
Features Summary
Unassembled 1/5th scale electric-powered Off-Road Buggy
Ready for your 6S or 8S LiPo electronics
Streamlined HPI Baja 5B Flux body design
Adjustable motor mount
Adjustable HD shock absorbers
Monocoque chassis
Low CG for superior handling
Long travel suspension
Viscous torque oil-filled gear differential
All-terrain tires
Beadlock wheels with metal insert hubs
Aluminum rear shock tower
Hard plastic skid plates
Adjustable rear wing
Quick access to all critical maintenance points
Dual bellcrank steering
Cam type servo saver
Hex socket hardware
Gunmetal anodizing
Full set of rubber-sealed ball bearings
Enclosed receiver box
Chassis Specifications
Overall Length 817mm
Height: 255mm
Width: Front - 460mm; Rear - 480mm
Tire Track (to center of tires): Front - 395mm; Rear - 400mm
Wheelbase: 570mm
Ride Height: 76mm
Suspension Travel: Front - 95mm; Rear - 100mm
Weight: 9.6kg (21.3lb)
Adjustable Camber: front - shims; rear - screw
Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock)
Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up)
Aircraft aluminum 6061 T6 monocoque chassis
Double wishbone suspension with adjustable roll center F/R
Drive system: HD metal gears with sealed gear box (8.382:1 gear ratio)
Differential: viscous torque control with 4 pinion gears; sealed diff case with silicone oil
Shock absorber: HD Aluminum coilover shock absorber with fully adjustable preload collar
Wheel type: 3-piece beadlock design, high impact nylon material with inset heavy-duty metal hex hub
#160324 BAJA 5B FLUX SBK
1/5th Scale 2WD Electric Buggy Self Build Kit with Clear Body
SPECIFICATIONS:
Length: 817mm
Width: 480mm
Height: 255mm
Wheelbase: 562mm
Drivetrain: RWD
WHAT YOU NEED:
Radio system with transmitter, receiver and large scale steering servo
Large scale brushless motor and ESC with suitable high-current battery connectors
1 or 2 matching battery packs with suitable battery charger and connectors to match ESC
What's the FIRST thing new RC drivers want? MORE SPEED! That's why the new Blackzon Smyter TURBO DT and DB are here - fitted with a powerful BRUSHLESS MOTOR system for extra power, performance and FUN!
4WD shaft drive Desert Buggy
3S-capable Brushless System
Adjustable Oil-Filled Coilover Shocks
4-Gear Steel Differentials Front & Rear
Metal Driveshafts & Hex Hubs Front & Rear
Independent double wishbone suspension
Gear cover to keep debris away from the spur gear
Dual Point Bell Crank Steering System
Servo Saver Built into Servo Horn
Complete Set of Ball Bearings
Splashproof Electronics
2.4GHz Radio with 2 in 1 ESC/Receiver
Li-Po 7.4V 1600mAh Battery w/ T-Plug connector
USB Charger included
LED Roof Light fitted to Body
Front LED Lights included in box (customer to fit if desired)
Speed Limiter using Speed Dial on Transmitter
3S Battery & Charger available as options soon
Top speed 2S: 45km/h (28mph)
Top speed 3S: 70km/h (43mph)
Specification:
Length: 395mm
Width: 255mm
Height:160mm
Wheelbase: 240mm
Wheel Diameter: 95mm
Wheel Width: 35mm
Items Required:
3 x AA Batteries for transmitter - HPI Recommends #101939 Plazma AA Batteries
Sent from supplier 4-8 day delivery
Introducing the HPI Racing Venture18 – your ultimate companion for off-road adventure and exploration. Like its bigger brother, the Venture18 combines a tough formed steel C-channel chassis with a realistic suspension and drivetrain. Despite its compact size, this truck is packed with impressive features, including a new all-metal 2-speed transmission, 4-link front and rear suspension, and universal telescopic counter-rotating driveshafts. With authentically scaled oil-filled shock absorbers and full-time locked differentials, the Venture18 offers dependable handling in all off-road conditions.
The Venture18 also marks the return of officially licensed Toyota products to the HPI Racing lineup. The meticulously crafted 1985 Toyota Hilux SR5 body features a clipless polycarbonate body, and it’s available in two striking color options – a Gloss Black and a vibrant Gloss Red with a bold stripe kit. The body is prepainted and also features clear windows, plus scale accents like Toyota emblems, front grill, door handles, wipers, functional mirrors, plus tube-style bumpers and rollbars for an impressive level of realism. The fitted LED light kit enhances the authenticity even further, giving the Venture18 that extra layer of detail that truly stands out!
The Venture18 is fully Ready-to-Run (RTR) and includes a 600mAh LiPo battery pack plus a convenient USB balance charger that allows you to charge up anywhere, you can take the Venture18 on your next adventure and experience the thrill of off-road exploration like never before. It’s more than just a toy – it’s a vehicle for freedom, fun, and the spirit of adventure.
Gear up, hit the trails, and let your adVenture begin!
Sent from supplier 4-8 day delivery
Recommended for beginners
Suitable for All terrain
Splashproof Electronics
Top speed about 30km / h
Required for operation: Batteries for controller (2 x AA)
Today we"re launching the ideal first Monster Truck for any RC beginner looking to take their first steps (and even jumps!) into our great hobby! The 1:16th scale Slyder from our BlackZon brand is small in size but BIG on fun!!
The BlackZon Slyder is perfect for getting a taste of RC jumping, performing stunts, bashing (and crashing!) ...Simply charge n" go and keep coming back for more!
Sent from supplier 4-8 day delivery
BlackZon SMYTER DT - Desert Truck
For that extra downforce for blasting over rocks and dunes, the Desert Truck gives you the all-terrain racing edge while its aggressive body style and grippy tires make the DT as good to look at as it is to drive
Features:
- 4WD shaft drive
- Independent double wishbone suspension
- Adjustable Coilover Shocks
- 4-Gear Differentials Front & Rear
- Gear cover to keep debris away from the spur gear
- Dual Point Bell Crank Steering System
- Servo Saver Built into Servo Horn
- Complete Set of Ball Bearings
- Splashproof Electronics
- Brushed electric 390 motor
- 2.4GHz Radio with 2 in 1 ESC/Receiver
- Li-Ion 7.4V 1500mAh Battery w/ T-Plug connector
- USB Charger included
- LED Roof Light fitted to Body
- Front LED Lights included in box (customer to fit if desired)
- Speed Limiter using Speed Dial on Transmitter
- Top speed 27km/h (17mph)
Specification:
Length: 395mm
Width: 255mm
Height:160mm
Wheelbase: 240mm
Wheel Diameter: 95mm
Wheel Width: 35mm
Items Required:
3 x AA Batteries for transmitter
Sent from supplier 4-8 day delivery
Features:
- 4WD shaft drive
- Independent double wishbone suspension
- Adjustable Coilover Shocks
- 4-Gear Differentials Front & Rear
- Gear cover to keep debris away from the spur gear
- Dual Point Bell Crank Steering System
- Servo Saver Built into Servo Horn
- Complete Set of Ball Bearings
- Splashproof Electronics
- Brushed electric 390 motor
- 2.4GHz Radio with 2 in 1 ESC/Receiver
- Li-Ion 7.4V 1500mAh Battery w/ T-Plug connector
- USB Charger included
- LED Roof Light fitted to Body
- Front LED Lights included in box (customer to fit if desired)
- Speed Limiter using Speed Dial on Transmitter
- Top speed 27km/h (17mph)
Specification:
Length: 395mm
Width: 255mm
Height:160mm
Wheelbase: 240mm
Wheel Diameter: 95mm
Wheel Width: 35mm
Items Required:
3 x AA Batteries for transmitter
