Sent from supplier 4-8 day delivery
We are super excited to be expanding the popular Blackzon Smyter truck range with two more Smyter TURBOs!
What's the FIRST thing new RC drivers want? MORE SPEED! That's why the new Blackzon Smyter TURBO DT and DB are here - fitted with a powerful BRUSHLESS MOTOR system for extra power, performance and FUN!
SMYTER TURBO DB - Under the hood!
One of Blackzon's most popular kits gets even MORE speed, plus awesome LED lights fitted as standard!
With its roll cage housing the realistic driver and co-driver figures, gnarly beadlock effect treaded tires and fully functioning spare wheel and tire to get you out of a jam on those desert runs, The Smyter Desert Buggy is every bit as much fun to drive as you'd imagine.
4WD shaft drive Desert Buggy
3S-capable Brushless System
Adjustable Oil-Filled Coilover Shocks
4-Gear Steel Differentials Front & Rear
Metal Driveshafts & Hex Hubs Front & Rear
Independent double wishbone suspension
Gear cover to keep debris away from the spur gear
Dual Point Bell Crank Steering System
Servo Saver Built into Servo Horn
Complete Set of Ball Bearings
Splashproof Electronics
2.4GHz Radio with 2 in 1 ESC/Receiver
Li-Po 7.4V 1600mAh Battery w/ T-Plug connector
USB Charger included
LED Roof Light fitted to Body
Front LED Lights included in box (customer to fit if desired)
Speed Limiter using Speed Dial on Transmitter
3S Battery & Charger available as options soon
Top speed 2S: 45km/h (28mph)
Top speed 3S: 70km/h (43mph)
Specification:
Length: 395mm
Width: 255mm
Height:160mm
Wheelbase: 240mm
Wheel Diameter: 95mm
Wheel Width: 35mm
Items Required:
3 x AA Batteries for transmitter - HPI Recommends #101939 Plazma AA Batteries
Sent from supplier 4-8 day delivery
The Savage XL FLUX combines the awesome raw power of 6S LiPo brushless power with the stability of a long wheelbase in the legendary Savage HPI monster truck package! The colossally powerful FLUX 2200KV motor is ready for all the power you can run through it, and the FLUX 6S-capable electronic speed controller is fully capable of up to 22.2 volts of power to let you pull off giant stunts and jaw-dropping speed. The Savage XL FLUX is packed with options and ready to rock right out of the box!
Crazy as FLUX Speed and Power
Easy plug-and-go convenience is the hallmark of electric RC trucks, and the Savage XL FLUX is no different. Just plug in two matching battery packs and you are off and running! The Flux 6S-capable speed controller can handle massive amounts of power, and you can fit standard 2S or 3S LiPo batteries, or our extra-long #106397 2S and #107222 3S LiPo batteries designed just for the Savage FLUX line of trucks! Want to break the speed limit with your monster truck? With the Savage XL FLUX, it's super-easy! With 2 3S LiPo batteries and on-road tires like our #4729 or #4731 mounted Phaltlines you can hit 62 mph (100km/h) with the pull of a trigger!
Like all HPI trucks, the Savage XL FLUX is easy to drive with the included steering wheel controller - but it shouldn't be handled by beginners! We recommend the Savage XL FLUX be driven only by RC hobbyists with plenty of experience and good reactions! With a pair of 7.4 or 11.1 volt batteries installed, the Savage XL FLUX gets up to insane speeds VERY quickly! Expect to get mud, rocks and dirt slung at you when you pull the trigger!
Once you get used to the power of the FLUX 2200Kv motor, you'll be able to rip off huge stunts at your local skate park, achieve crazy fast top speeds in empty parking lots and throw up huge rooster tails of dirt! The power of the Savage XL FLUX cannot be denied!
After over a decade of thrilling serious RC bashing performance, the HPI Savage has earned a reputation for being the toughest monster truck you can find. A pair of XL-Long 2.5mm thick aluminum Twin Vertical Plates (TVP) provide the backbone of the Savage, and a thick 7075 aluminum motor plate holds the super-powerful FLUX 2200Kv motor in place. The XL-Wide Savage suspension is ultra-tough, with super-thick webbed suspension arms and uprights built to handle gigantic jumps, rough landings, rolls and full-speed crashes. Super heavy-duty, bulletproof drivetrain parts like thick steel dogbones, all-metal transmission gears, forged diff gears and metal diff cases make sure drivetrain can handle all the power of the XL-Powerful FLUX motor. Huge Big Bore dual-stage oil-filled shocks tame the roughest landings and terrain, giving you total control at all times! The Savage XL FLUX is simply the toughest electric monster truck you'll ever find!
Savage XL Design with Flux Power
The Savage XL FLUX is based on the already awesome long wheelbase and extra-wide Savage XL platform, featuring a low-mounted FLUX 2200KV motor in place of the big-block nitro engine, a powerful FLUX 6S-capable speedo in place of the fuel tank, and twin battery boxes hanging on the outside to hold a variety of battery types. Power your Savage XL FLUX with a pair of matching LiPo batteries equipped with 2S 7.4v or a whopping 3S 11.1v power! This truck is packed with HPI upgrades and options, including the 3.0mm TVP (Twin Vertical Plate) chassis, tough all-metal gear drivetrain, extra-powerful metal-gear servo, forged diff gears and legendary Savage suspension parts and shock towers for extreme durability! Big Bore shocks at each corner of the Savage XL FLUX take up the shock of big-air landings and give you excellent control and traction on any surface.
Please see our note below recommending LiPo batteries above 4000mAh and 30C to get the most out of the electronics in the Savage XL FLUX.
Features
Factory-assembled & pre-painted electric-powered 4WD 1/8 scale electric-powered monster truck
2.4GHz radio system
3.0mm TVP (Twin Vertical Plate) chassis with XL-long wheelbase
HPI high torque steering servo
HPI FLUX 6S-capable brushless ESC
HPI FLUX 2200KV brushless motor
6S LiPo capability
Big Bore silicone oil-filled shocks
All-metal bulletproof drivetrain
43-tooth steel spur gear
Super heavy-duty dogbones
Forged diff gears
17mm hex hubs
Shock towers have multiple shock mounting positions
Quick access to the front or rear differential by removing just 4 screws
Cam type servo saver
Twin vented battery boxes with locking battery box doors
Battery boxes fit specially designed HPI #106397 2S and #107222 3S batteries
All socket head hardware
Slipper clutch to protect drivetrain
Protected receiver box
3mm 7075 motor plate
Dual 8mm billet motor clamps
4-gear differentials
Aluminum front and rear suspension braces
Front and rear skid plate bumpers
Full set of ball bearings
Chrome Warlock wheels
WHAT YOU NEED:
2 matching LiPo batteries with Deans compatible T-Plugs
and at least 4000mAh capacity and 30C discharge
Sent from supplier 4-8 day delivery
We're expanding the RS4 Sport 3 Drift range with the help of Dai Yoshihara and his awesome Turn 14 Distribution Formula D machine! The 2011 series champion and multiple podium finisher has had his classic Nissan S13 replica in our drift car line-up for some time, and we're extremely proud to have the next car in his fleet, an amazing 1000 brake horsepower Subaru BRZ beast!
The Subaru BRZ body features Dai's official Turn 14 Distribution race livery in its unique blue, black and silver finish - another amazing replica drift car to add to our ever-growing athlete line-up! The Subaru BRZ is a rare sight on the drifting scene, so right out of the box this beauty will be the center of attention! Under the hood, this 1/10th scale Subaru is built on the fan favourite HPI Racing Touring Car chassis, the RS4 Sport 3. With full time shaft driven 4WD, a fully sealed drivetrain, waterproof 2.4 GHz electronics/radio gear, fully independent double wishbone suspension and adjustable oil filled shocks, you'll be ready to shred in any condition.
Completing the car is a set of brand new R5 Wheels inspired by the R.M.K Design R5 Forged Wheels used by Dai himself, each wrapped in super-hard compound Falken Azenis RT615 T-Drift Tires
We're introducing an awesome new wheel in our 1/10 line up, inspired by the actual R.M.K Design R5 Forged Wheels used by World Champion drifter Dai Yoshihara on his Subaru BRZ drift car. Moulded from durable nylon, these lightweight wheels are tough enough for racing and stylish enough to stand out in any winning line up.
Rounding out the package are official replicas of the actual tires that Dai Yoshihara runs on his Subaru BRZ: Falken Azenis RT615 T-Drift Tires are a special hard plastic tire with the fully licensed tread pattern from the popular Falken Azenis RT615 tire. The realistic tread pattern is also a great way to show off your drift machine. The extremely hard compound delivers long life and makes it easy to break traction to get your machine sideways for maximum drift angle as you clip the apex.
1/10th Scale Pre-Assembled 4WD Drift Car
with 2.4GHz Radio System and Painted
Dai Yoshihara Subaru BRZ Body
SPECIFICATIONS:
Length: 431mm (17")
Height: 127mm (5")
Width: 200mm (7.9")
Wheelbase: 254mm (10")
Includes:
4 AA batteries
7.2v 2000 mAh NiMH battery with standard plug
Wall battery charger
Sent from supplier 4-8 day delivery
The Jumpshot is a globally renowned RC fun-machine and the perfect way to get a quick fix of HPI RC excitement in gardens, dirt tracks and just about anywhere. So much so that leading tire brand Toyo Tires put this Jumpshot SC complete with special edition livery and 1/10th scale replicas Open Country M/T off road tires, center stage in a national TV ad campaign!
What's more this V2 version is packed with upgrades including the 12-turn 550-size motor with optimized gearing and a raft of durability improvements including new drivetrain gears, suspension parts and servo saver!
Due to popular demand, we're stoked to release this special
edition to the world as a Toyo Tires officially
licensed product!
With a brand new, super-powerful, 12-turn, 550-size motor, the Jumpshot V2 trucks have tons of power for more fun! The bigger size of motor gives you tons of extra torque for fast acceleration and maximum jumping power, and the 12-turn construction means you'll get extra-high RPM for superfast top speeds! Enhanced gearing from the new and improved pinion & spur gear combination means you get the best of both worlds: wild acceleration from a standing start, plus crazy fast top-end speed! And with the new T-plug battery plugs, you can easily fit in more powerful batteries for mind-blowing action!
Brand new materials and designs for several important parts mean you can bash and race all day long thanks to the new Differential - Composite main gear - Sealed 4-Bevel gear design using internal gears from the Sport3, SavageXS and Bullet. Plus, new metal idler gear, spur gears, reinforced camber link, new shielded spur gear cover, metal motor mount plus a stronger servo saver mean that the V2 really means something when it comes to the HPI Jumpshot trucks! You can drive all day and not worry about a thing, whether you're jumping, bashing, racing or just going crazy!
The new Jumpshot SC V2 features a brand new look that will definitely turn heads and get the attention of your friends at the local bashing spot! The officially licensed Toyo Tires livery really sets off the racing scheme and the racing numbers, stabilising wings, aggressive black wheels and chunky all-terrain official 1/10th Open Country M/T off road tires tires all add up to a look and style that can't be beat at any track or RC park!
The Jumpshot V2 line-up is loaded with features that will keep you driving for hours! In the middle of the Savage-style TVP chassis, the radio box is protected from the elements, and the steering features not just a sturdy direct-link steering system but also a water-resistant steering servo for extreme protection. A powerful rear-wheel 2WD drivetrain lets you kick out the rear end for extreme fun, on-road or off! The new 12-turn, 550-size motor with its waterproof, LiPo-ready speed controller and optimized gear ratio gives you great acceleration and top speed, and the new extra-durable gears are much stronger than the original design. A newly designed servo saver and stronger upper suspension links also make the front end and steering extra-rugged for driving over the rough stuff!
Like all HPI cars and trucks, a complete set of ball bearings lets you get the most out of every battery pack without losing any power from the brushed motor fitted at the back of the chassis. This means you can blast through any type of terrain you want, whether it's grass, mud, asphalt, gravel or anything else!
Factory-built Ready To Run 2WD short course truck
NEW! Metal Top & Middle Transmission Gears
NEW! Revised tooth profile for improved gear mesh and lower rolling resistance
NEW! Composite Differential - Sealed oil filled 4-Bevel gear design
NEW! Fully enclosed Spur Gear Cover with Rubber Cap to access slipper clutch
NEW! Rear Gear Box with Metal Motor Mount Plate Insert
Short Course truck style body with officially licensed Toyo Tires livery
1/10th scale replica Open Country M/T off road tires
Tough aluminum TVP chassis design
Battery box fits 6- or 7-cell NiMH flat style stick packs and 2S LiPo packs
Battery easily accessible from bottom of chassis
12-turn 550-size motor for maximum power
HPI SC-3SWP2 Waterproof LiPo-ready ESC fitted with high-power T-Plug
Enclosed receiver box
2.4 GHz radio system
Oil-filled shock absorbers
Double-wishbone suspension design
Sturdy body mounts
Standard 12mm hex hub wheel fitting
Black 8-spoke wheels
Sent from supplier 4-8 day delivery
The Jumpshot SC V2 is the short course version of the Jumpshot platform, with front and rear ‘basher’ bumpers ready for the rigors of off-road bashing, whilst the sleek short course body and all-terrain tires give it fantastic looks and great performance!
The V2 version is packed with features for maximum fun anywhere you drive it! For awesome speed, the 12-turn 550-size motor with optimized gearing is great for fast acceleration and high top speeds. A host of durability improvements include tough drivetrain gears, durable suspension parts and extra-tough servo saver!
Underneath the sleek racing body of the Jumpshot SC V2, the chassis is a Savage-style TVP (Twin Vertical Plate) design for a super-stiff chassis and center-balanced weight. The modular design of the chassis gives you simple maintenance and durable crash protection for all the electronics. The battery is quickly accessed from underneath the truck, so changing batteries is extra-fast for more driving fun!
Factory-built Ready To Run 2WD Short Course Truck
Tough aluminum TVP chassis design
Battery box fits 6- or 7-cell NiMH flat style stick packs and 2S LiPo packs
Battery easily accessible from bottom of chassis
12-turn 550-size motor for maximum power
HPI SC-3SWP2 Waterproof LiPo-ready ESC fitted with high-power T-Plug
2.4 GHz radio system
Enclosed receiver box
Metal Top & Middle Transmission Gears
Revised tooth profile for improved gear mesh and lower rolling resistance
Composite Differential - Sealed oil filled 4-Bevel gear design
Fully enclosed Spur Gear Cover with Rubber Cap to access slipper clutch
Rear Gear Box with Metal Motor Mount Plate Insert
Oil-filled shock absorbers
Double-wishbone suspension design
Sturdy body mounts
Standard 12mm hex hub wheel fitting
Black 8-spoke wheels
#160261 Jumpshot SC V2 - Green
1/10 2WD Electric short course Truck
Specifications:
Length: 560mm
Width: 295mm
Height: 190mm
Wheelbase: 335mm
Weight: 1.95kg
What you need:
4 AA batteries for transmitter - HPI Recommends #101939 Plazma AA batteries
6- or 7-cell NiMH flat style stick pack or 2S LiPo pack with T-plug - HPI Recommends #160160 2S LiPo
Battery charger for car battery - HPI Recommends:
#160239 (AUS)
Sent from supplier 4-8 day delivery
The Blackzon Slyder is perfect for getting a taste of RC jumping, performing stunts, bashing - and even crashing! The Blackzon trucks are all about simple charge-and-go fun and just keep coming back for more!
With its 4WD shaft drivetrain, independent double wishbone suspension, adjustable coilover shocks and 4-gear differentials both front and rear, the Slyder dominates any kind of terrain, both indoors and out, giving you all-out fun wherever you choose to drive! Plus, with its protective gear cover, servo saver and waterproof electronics - you don't need to worry about puddles or any kind of debris standing in your way!
Brushless motor system
Rear metal dogbones
4WD shaft drive Monster Truck or Stadium Truck
Independent double wishbone suspension
Adjustable Coilover Shocks
4-Gear Differentials Front & Rear
Gear cover to keep debris away from the spur gear
Dual Point Bell Crank Steering System
Servo Saver Built into Servo Horn
Complete Set of Ball Bearings
Waterproof Electronics
2.4GHz Radio with 2 in 1 ESC/Receiver
Li-Po 7.4V 1000mAh Battery w/ T-Plug connector
USB Charger included
Front LED Lights included in box (customer to fit if desired)
Speed Limiter using Speed Dial on Transmitter
Top speed 34km/h (21mph)
Specification:
Length: 270mm
Width: 215mm
Height: 130mm
Wheelbase:175mm
Items Required:
3 x AA Batteries for transmitter - HPI Recommends #101939 Plazma AA Batteries
Sent from supplier 4-8 day delivery
The Blackzon Slyder is perfect for getting a taste of RC jumping, performing stunts, bashing - and even crashing! The Blackzon trucks are all about simple charge-and-go fun and just keep coming back for more!
With its 4WD shaft drivetrain, independent double wishbone suspension, adjustable coilover shocks and 4-gear differentials both front and rear, the Slyder dominates any kind of terrain, both indoors and out, giving you all-out fun wherever you choose to drive! Plus, with its protective gear cover, servo saver and waterproof electronics - you don't need to worry about puddles or any kind of debris standing in your way!
Brushless motor system
Rear metal dogbones
4WD shaft drive Monster Truck or Stadium Truck
Independent double wishbone suspension
Adjustable Coilover Shocks
4-Gear Differentials Front & Rear
Gear cover to keep debris away from the spur gear
Dual Point Bell Crank Steering System
Servo Saver Built into Servo Horn
Complete Set of Ball Bearings
Waterproof Electronics
2.4GHz Radio with 2 in 1 ESC/Receiver
Li-Po 7.4V 1000mAh Battery w/ T-Plug connector
USB Charger included
Front LED Lights included in box (customer to fit if desired)
Speed Limiter using Speed Dial on Transmitter
Top speed 34km/h (21mph)
Specification:
Length: 270mm
Width: 215mm
Height: 130mm
Wheelbase:175mm
Items Required:
3 x AA Batteries for transmitter - HPI Recommends #101939 Plazma AA Batteries
Sent from supplier 4-8 day delivery
The Blackzon Slyder is perfect for getting a taste of RC jumping, performing stunts, bashing - and even crashing! The Blackzon trucks are all about simple charge-and-go fun and just keep coming back for more!
With its 4WD shaft drivetrain, independent double wishbone suspension, adjustable coilover shocks and 4-gear differentials both front and rear, the Slyder dominates any kind of terrain, both indoors and out, giving you all-out fun wherever you choose to drive! Plus, with its protective gear cover, servo saver and waterproof electronics - you don't need to worry about puddles or any kind of debris standing in your way!
Brushless motor system
Rear metal dogbones
4WD shaft drive Monster Truck or Stadium Truck
Independent double wishbone suspension
Adjustable Coilover Shocks
4-Gear Differentials Front & Rear
Gear cover to keep debris away from the spur gear
Dual Point Bell Crank Steering System
Servo Saver Built into Servo Horn
Complete Set of Ball Bearings
Waterproof Electronics
2.4GHz Radio with 2 in 1 ESC/Receiver
Li-Po 7.4V 1000mAh Battery w/ T-Plug connector
USB Charger included
Front LED Lights included in box (customer to fit if desired)
Speed Limiter using Speed Dial on Transmitter
Top speed 34km/h (21mph)
Specification:
Length: 270mm
Width: 215mm
Height: 130mm
Wheelbase:175mm
Items Required:
3 x AA Batteries for transmitter - HPI Recommends #101939 Plazma AA Batteries
Sent from supplier 4-8 day delivery
32638WG-B
AWD series is a Four Wheel Drive chassis with Drift tires and paired with the
Syncro KT-531P Transmitter. Perfect for drifting in small spaces. And this version comes COMPLETE WITH LED LIGHTS & GYRO
To bring its dynamic performance to even more drivers, the MINI-Z AWD is now available in a Readyset. The MA-020 chassis features VCS (variable camber suspension) on the front that optimizes camber change with suspension stroke and a specially designed circuit board. The gyro can be adjusted by turning a small volume on the chassis to reflect the amount of steering correction in response to changes in chassis posture, allowing beginners through to experts to drive to their full potential. Fully fitted out with precision ball bearings, the high drive efficiency of the MA-020 chassis is complimented in the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that requires no frequency band setting; all at a great value price. Simply set the batteries to enjoy the thrill of drift driving with the included set of drift tires. The chassis is compatible with nearly all ASC MINI-Z bodies (additional parts maybe required for some body styles). The MINI-Z AWD promises a unique world of dramatic racing action for you to experience and enjoy.
●MINI-Z AWD Readyset based on MA-020 chassis.
●Special circuit board updated with optimized steering control program.
●Chassis includes gyro & features gyro sensitivity adjustment function.
●LED front & rear lights included!
●Drift tires are installed as standard.
●Readyset requires only batteries to be ready for action!
●Features 2.4GHz Syncro KT-531P transmitter that requires no setup of frequency bands.
●Factory completed body comes with display model quality finish.
●Features VCS (variable camber suspension) that adjusts camber in accordance with suspension stroke.
●Coil spring on front suspension can be easily replaced without tools.
●wide range of optional parts is available to be installed.
●Note) Optional ICS can NOT be used. Also, this model is specially designed for the KT-531P transmitter. It is not compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is only compatible with the special gyro unit included.
<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Syncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool
＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
Sent from supplier 4-8 day delivery
32639W-B
AWD series is a Four Wheel Drive chassis with Drift tires and paired with the
Syncro KT-531P Transmitter. Perfect for drifting in small spaces.
To bring its dynamic performance to even more drivers, the MINI-Z AWD is now available in a Readyset. The MA-020 chassis features VCS (variable camber suspension) on the front that optimizes camber change with suspension stroke and a specially designed circuit board. The chassis design allows space for installing the optional gyro unit(Sold separately:MZW446>here for gyro support). The gyro can be adjusted by turning a small volume on the chassis to reflect the amount of steering correction in response to changes in chassis posture, allowing beginners through to experts to drive to their full potential. Fully fitted out with precision ball bearings, the high drive efficiency of the MA-020 chassis is complimented in the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that requires no frequency band setting; all at a great value price. Simply set the batteries to enjoy the thrill of drift driving with the included set of drift tires. The chassis is compatible with nearly all ASC MINI-Z bodies (additional parts maybe required for some body styles). The MINI-Z AWD promises a unique world of dramatic racing action for you to experience and enjoy.
●MINI-Z AWD Readyset based on MA-020 chassis.
●Special circuit board updated with optimized steering control program.
●Chassis features gyro sensitivity adjustment function.
●Drift tires are installed as standard.
●Readyset requires only batteries to be ready for action!
●Features 2.4GHz Syncro KT-531P transmitter that requires no setup of frequency bands.
●Factory completed body comes with display model quality finish.
●Features VCS (variable camber suspension) that adjusts camber in accordance with suspension stroke.
●Coil spring on front suspension can be easily replaced without tools.
●wide range of optional parts is available to be installed.
●Note) Optional ICS can NOT be used. Also, this model is specially designed for the KT-531P transmitter. It is not compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is only compatible with the special gyro unit (sold separately:MZW446).
As the first model with 4WD and other advanced equipment, this model competed in Group A racing and was released for domestic N1 racing while being compliant to public road regulations. As it was used a base car for racing, it did not include equipment such as air conditioning while other aerodynamic elements were revised.
<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool
＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
Sent from supplier 4-8 day delivery
More performance and style with improvements to each key component, this machine is more than just a reproduction!
As the 5th model to make its return as part of the vintage series, the ever-popular Scorpion released in 1982 was relaunched 2 years ago and has undergone a detailed overhaul to match modern performance with retro styling. The new Turbo Scorpion remains true to the essence of the unique Scorpion design throughout, but features Scorpion-style wheels in the larger 2.2 inch modern standard wheels for improved off-road performance. In addition, 12mm oil shocks based on the Optima deliver rock-solid running stability and excellent damping characteristics that work in combination with high-grip front and rear tires with a 20mm wider front tread and 10mm longer wheelbase than the original Scorpion to realize improved control and handling performance. With a thorough modernization, the new Turbo Scorpion is ready and willing to accept modern-day power sources and compete on modern race circuits. The standard Turbo Scorpion is a fully optioned chassis configuration and is ready to take the punishment that goes with hard driving.
●Turbo Scorpion updated to meet the demands of the modern off-road racing scene.
●Kit includes pre-assembled gearbox.
●Features same racy-style mini bumper as the original.
●Rear section reinforced with Rear Sus Post L, strengthened by added flange.
●Features accurate recreation of the original loop-mount light buckets. Optional LED lights can be simply bolted on.
●Screwed surfaces are countersunk for flat finish.
●Decals included in kit are diecut. Stretch for easy application and beautiful body finish.
＜ Kit Contents ＞
●Pre-assembled kit (gear box is pre-assembled)
●Polycarbonate clear body
●Decals
●Chassis parts
●L type hexagonal wrench
●Cross wrench
●Shock wrench
●Shock oil
●Grease
＜ Required for operation ＞
●2ch 1 servo R/C system for cars
●540 class motor
●ESC compatible with motor used
●Battery for chassis compatible with ESC used
●Battery charger
●Paint for polycarbonate body
●Batteries for transmitter
●Tools (1.5, 2, 2.5mm hexagonal wrench driver)
Sent from supplier 4-8 day delivery
32528MB-B
The combination of the highly-detailed body and a completely new 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler.
In the signature Jeep® Wrangler lineup, the Rubicon boasts the strongest off-road performance. With black over-fenders, front grille with dark grey accent, and the distinctive Jeep® round headlights, the formidable styling of the black hard top is immaculately reproduced in a model that rests on the palm of your hand.
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set（10T、12T、14T、16T、18T、20T）
●3 types of pinion gear spacers
●4 x AAA batteries for the transmitter
●4 x AAA batteries for chassis （Alkaline or NiMH）
Sent from supplier 4-8 day delivery
32528S-B
The combination of the highly-detailed body and a completely new 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler.
In the signature Jeep® Wrangler lineup, the Rubicon boasts the strongest off-road performance. With black over-fenders, front grille with dark grey accent, and the distinctive Jeep® round headlights, the formidable styling of the black hard top is immaculately reproduced in a model that rests on the palm of your hand.
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set（10T、12T、14T、16T、18T、20T）
●3 types of pinion gear spacers
●4 x AAA batteries for the transmitter
●4 x AAA batteries for chassis （Alkaline or NiMH）
Sent from supplier 4-8 day delivery
The combination of the highly-detailed body and a completely new 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler.
In the signature Jeep® Wrangler lineup, the Rubicon boasts the strongest off-road performance. With black over-fenders, front grille with dark grey accent, and the distinctive Jeep® round headlights, the formidable styling of the black hard top is immaculately reproduced in a model that rests on the palm of your hand.
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set（10T、12T、14T、16T、18T、20T）
●3 types of pinion gear spacers
●4 x AAA batteries for the transmitter
●4 x AAA batteries for chassis （Alkaline or NiMH）
Sent from supplier 4-8 day delivery
The combination of the highly-detailed body and a completely new 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler.
In the signature Jeep® Wrangler lineup, the Rubicon boasts the strongest off-road performance. With black over-fenders, front grille with dark grey accent, and the distinctive Jeep® round headlights, the formidable styling of the black hard top is immaculately reproduced in a model that rests on the palm of your hand.
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set（10T、12T、14T、16T、18T、20T）
●3 types of pinion gear spacers
Required for Operation
●4 x AAA batteries for the transmitter
●4 x AAA batteries for chassis （Alkaline or NiMH）
Sent from supplier 4-8 day delivery
The combination of the highly-detailed body and a completely new 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler.
In the signature Jeep® Wrangler lineup, the Rubicon boasts the strongest off-road performance. With black over-fenders, front grille with dark grey accent, and the distinctive Jeep® round headlights, the formidable styling of the black hard top is immaculately reproduced in a model that rests on the palm of your hand.
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set（10T、12T、14T、16T、18T、20T）
●3 types of pinion gear spacers
Required for Operation
●4 x AAA batteries for the transmitter
●4 x AAA batteries for chassis （Alkaline or NiMH）
Sent from supplier 4-8 day delivery
AWD series is a Four Wheel Drive chassis with Drift tires and paired with the Syncro KT-531P Transmitter. Perfect for drifting in small spaces.
To bring its dynamic performance to even more drivers, the MINI-Z AWD is now available in a Readyset. The MA-020 chassis features VCS (variable camber suspension) on the front that optimizes camber change with suspension stroke and a specially designed circuit board. The chassis design allows space for installing the optional gyro unit(sold separately). The gyro can be adjusted by turning a small volume on the chassis to reflect the amount of steering correction in response to changes in chassis posture, allowing beginners through to experts to drive to their full potential. Fully fitted out with precision ball bearings, the high drive efficiency of the MA-020 chassis is complimented in the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that requires no frequency band setting; all at a great value price. Simply set the batteries to enjoy the thrill of drift driving with the included set of drift tires. The chassis is compatible with nearly all ASC MINI-Z bodies (additional parts maybe required for some body styles). The MINI-Z AWD promises a unique world of dramatic racing action for you to experience and enjoy.
●MINI-Z AWD Readyset based on MA-020 chassis.
●Special circuit board updated with optimized steering control program.
●Chassis features gyro sensitivity adjustment function.
●Drift tires are installed as standard.
●Readyset requires only batteries to be ready for action!
●Features 2.4GHz Syncro KT-531P transmitter that requires no setup of frequency bands.
●Factory completed body comes with display model quality finish.
●Features VCS (variable camber suspension) that adjusts camber in accordance with suspension stroke.
●Coil spring on front suspension can be easily replaced without tools.
●wide range of optional parts is available to be installed.
●Note) Optional ICS can NOT be used. Also, this model is specially designed for the KT-531P transmitter. It is not compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is only compatible with the special gyro unit (sold separately).
<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool
<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
Sent from supplier 4-8 day delivery
This is Kyosho Mini-Z AWD MA-020 Subaru Impreza WRC 2008 Blue Readyset RTR Car Kit EP w/ KT-531P Radio. To bring its dynamic performance to even more drivers, the MINI-Z AWD is now available in a Readyset. The MA-020 chassis features VCS (variable camber suspension) on the front that optimizes camber change with suspension stroke and a specially designed circuit board. The chassis design allows space for installing the optional gyro unit. The gyro can be adjusted by turning a small volume on the chassis to reflect the amount of steering correction in response to changes in chassis posture, allowing beginners through to experts to drive to their full potential. Fully fitted out with precision ball bearings, the high drive efficiency of the MA-020 chassis is complimented in the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that requires no frequency band setting; all at a great value price. Simply set the batteries to enjoy the thrill of drift driving with the included set of drift tires. The chassis is compatible with nearly all ASC MINI-Z bodies (additional parts maybe required for some body styles). The MINI-Z AWD promises a unique world of dramatic racing action for you to experience and enjoy.
Sent from supplier 4-8 day delivery
AWD series is a Four Wheel Drive chassis with Drift tires and paired with the
Syncro KT-531P Transmitter. Perfect for drifting in small spaces.
To bring its dynamic performance to even more drivers, the MINI-Z AWD is now available in a Readyset. The MA-020 chassis features VCS (variable camber suspension) on the front that optimizes camber change with suspension stroke and a specially designed circuit board. The chassis design allows space for installing the optional gyro unit(Sold separately:No.MZW446). The gyro can be adjusted by turning a small volume on the chassis to reflect the amount of steering correction in response to changes in chassis posture, allowing beginners through to experts to drive to their full potential. Fully fitted out with precision ball bearings, the high drive efficiency of the MA-020 chassis is complimented in the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that requires no frequency band setting; all at a great value price. Simply set the batteries to enjoy the thrill of drift driving with the included set of drift tires. The chassis is compatible with nearly all ASC MINI-Z bodies (additional parts maybe required for some body styles). The MINI-Z AWD promises a unique world of dramatic racing action for you to experience and enjoy.
*The separately sold LED light unit set (No.MZW429R) cannot be installed on the MAZDA SAVANNA RX-7 FC3S with Aero Kit and CFRP hood Red.
●MINI-Z AWD Readyset based on MA-020 chassis.
●Special circuit board updated with optimized steering control program.
●Chassis features gyro sensitivity adjustment function.
●Drift tires are installed as standard.
●Readyset requires only batteries to be ready for action!
●Features 2.4GHz Syncro KT-531P transmitter that requires no setup of frequency bands.
●Factory completed body comes with display model quality finish.
●Features VCS (variable camber suspension) that adjusts camber in accordance with suspension stroke.
●Coil spring on front suspension can be easily replaced without tools.
●wide range of optional parts is available to be installed.
●Note) Optional ICS can NOT be used. Also, this model is specially designed for the KT-531P transmitter. It is not compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is only compatible with the special gyro unit (sold separately:No.MZW446).
●The package includes a light pod set that customers can modify and attach to the body themselves.
Sent from supplier 4-8 day delivery
The combination of the highly-detailed body and 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler.
In 2019 the world's most popular mini RC series, known as the Kyosho MINI-Z, celebrated more than 20 years of unmatched performance and scale realism in the hobby-grade RC category. The continuous pursuit of performance and evolution has led to the creation of a completely-new ‘MINI-Z 4x4’ design that delivers an all-new driving experience for RC fans of all stripes, with superior overall design, driving performance and high-quality injection-molded scale body construction. A significant feature of the MINI-Z 4x4 series is the greater emphasis of body detail and quality of finish that even surpasses existing benchmarks set by the MINI-Z. The body is also molded with thicker material to better resist crash damage from operation in rough terrain. Incorporating the same ladder- style frame of real 4WD vehicles, the MINI-Z 4x4 boasts a 3-link rigid axle suspension combining what would normally be two upper links into a single upper A-arm to deliver maximum suspension movement. A specially designed high-torque steering servo enables this machine to throw its elbows around in the hard terrain for excellent performance in the toughest rock-crawler conditions. The high-torque 130-size motor brings out the beast in the MINI-Z 4x4, specially geared to run well in the low to medium speed ranges common in crawling. Designed to balance exquisite style, scale detail and superior driving performance, all the MINI-Z 4x4 needs is 8 x AAA alkaline batteries (sold separately). Enjoy driving under any conditions, from normal driving to rock crawling while appreciating the stunning visual appearance. The Kyosho Mini-Z 4x4 is the only mini crawler that delivers a full range of crawling performance in a smaller package.
● Adopts full-fledged solid axle links similar to the 1/10 scale models, ensuring the driving performance and wheel travel required for crawler models.
● Equipped with a specially tuned high-torque 130 motor. Additionally, the main gear unit features a slipper clutch that protects the drive system by releasing torque when under heavy load.
● Features a high-torque servo specifically designed for crawler models, capable of supporting authentic crawling performance. The steering link optimization achieves the largest steering angle in Mini-Z history.
● Full bearing specification with a total of 18 ball bearings. Metal gears, known for their durability, are used in parts that bear heavy loads.
● The "KT-531P" transmitter uses the FHSS 2.4GHz system and features a sponge on the steering wheel to enhance operability.
● Comes as a fully assembled, ready-to-run model, requiring only the insertion of batteries to begin operation.
● An optional light set (MZW429R) can be installed on the top of the circuit board. The lights respond to throttle operation, and the headlight's lighting interval can be adjusted freely—from steady lighting to blinking—via the transmitter's trim.
● Supports the separately sold gyro unit, and like the RWD/AWD series, manual adjustments can be made via the volume control.
● Equipped with popular BS Goodrich tires.
Sent from supplier 4-8 day delivery
AWD series is a Four Wheel Drive chassis with Drift tires and paired with the Syncro KT-531P Transmitter. Perfect for drifting in small spaces.
To bring its dynamic performance to even more drivers, the MINI-Z AWD is now available in a Readyset. The MA-020 chassis features VCS (variable camber suspension) on the front that optimizes camber change with suspension stroke and a specially designed circuit board. The chassis design allows space for installing the optional gyro unit(Sold separately:No.MZW446). The gyro can be adjusted by turning a small volume on the chassis to reflect the amount of steering correction in response to changes in chassis posture, allowing beginners through to experts to drive to their full potential. Fully fitted out with precision ball bearings, the high drive efficiency of the MA-020 chassis is complimented in the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that requires no frequency band setting; all at a great value price. Simply set the batteries to enjoy the thrill of drift driving with the included set of drift tires. The chassis is compatible with nearly all ASC MINI-Z bodies (additional parts maybe required for some body styles). The MINI-Z AWD promises a unique world of dramatic racing action for you to experience and enjoy.
※The separately sold LED light unit set (No.MZW429R) is not compatible with the Toyota Celica GT-Four RC No.7 WRC 1993 Juha Kankkunen.
●MINI-Z AWD Readyset based on MA-020 chassis.
●Special circuit board updated with optimized steering control program.
●Chassis features gyro sensitivity adjustment function.
●Drift tires are installed as standard.
●Readyset requires only batteries to be ready for action!
●Features 2.4GHz Syncro KT-531P transmitter that requires no setup of frequency bands.
●Factory completed body comes with display model quality finish.
●Features VCS (variable camber suspension) that adjusts camber in accordance with suspension stroke.
●Coil spring on front suspension can be easily replaced without tools.
●wide range of optional parts is available to be installed.
●Note) Optional ICS can NOT be used. Also, this model is specially designed for the KT-531P transmitter. It is not compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is only compatible with the special gyro unit (sold separately:No.MZW446).
Sent from supplier 4-8 day delivery
AWD series is a Four Wheel Drive chassis with Drift tires and paired with the
Syncro KT-531P Transmitter. Perfect for drifting in small spaces.
To bring its dynamic performance to even more drivers, the MINI-Z AWD is now available in a Readyset. The MA-020 chassis features VCS (variable camber suspension) on the front that optimizes camber change with suspension stroke and a specially designed circuit board. The chassis design allows space for installing the optional gyro unit(Sold separately:No.MZW711). The gyro can be adjusted by turning a small volume on the chassis to reflect the amount of steering correction in response to changes in chassis posture, allowing beginners through to experts to drive to their full potential. Fully fitted out with precision ball bearings, the high drive efficiency of the MA-020 chassis is complimented in the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that requires no frequency band setting; all at a great value price. Simply set the batteries to enjoy the thrill of drift driving with the included set of drift tires. The chassis is compatible with nearly all ASC MINI-Z bodies (additional parts maybe required for some body styles). The MINI-Z AWD promises a unique world of dramatic racing action for you to experience and enjoy.
*The separately sold LED light unit set (No.MZW429R) can be installed on the HKS SKYLINE GT-R （R32）1993 #87.
●MINI-Z AWD Readyset based on MA-020 chassis.
●Special circuit board updated with optimized steering control program.
●Chassis features gyro sensitivity adjustment function.
●Drift tires are installed as standard.
●Readyset requires only batteries to be ready for action!
●Features 2.4GHz Syncro KT-531P transmitter that requires no setup of frequency bands.
●Factory completed body comes with display model quality finish.
●Features VCS (variable camber suspension) that adjusts camber in accordance with suspension stroke.
●Coil spring on front suspension can be easily replaced without tools.
●wide range of optional parts is available to be installed.
●Note) Optional ICS can NOT be used. Also, this model is specially designed for the KT-531P transmitter. It is not compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is only compatible with the special gyro unit (sold separately:No.MZW711).
●The package includes a light pod set that customers can modify and attach to the body themselves.
Sent from supplier 4-8 day delivery
Latest high-performance MR-04 chassis
Now the standard MINI-Z RWD model!
Enjoy the full experience of high-performance R/C car racing right out of the box; just insert batteries into the car and transmitter. This is the simplicity of Kyosho Readyset packages. The small scale of the MINI-Z Racer is ideal for driving indoors and for people just becoming familiar with R/C cars. This MINI-Z RWD Readyset includes a renewed 2-wheel drive chassis at its core. Previous Readyset packages incorporated the 3rd generation MR-03 chassis, but the new RWD Readyset includes the 4th generation MR-04 chassis that was first released in 2023. While retaining some basic elements of the MR-03 design, the new MR-04 demonstrated its lower center of gravity and remodeled steering design with blistering speed and excellent handling in the top-of-the-line EVO2 debut model. The MR-04 chassis is mounted with R/C system and features a completed body finished to display model standard. This Readyset includes the same standard MR-04 chassis as other high-end MR-04 models and includes user-friendly 130-class brushed motor and the reliable Syncro KT-531P pistol grip transmitter. Just insert 4 x AAA alkaline batteries into both the car and the transmitter, and you’re ready for the fun to begin. High-performance comes straight from the standard setup, but you can tune up for elite-level performance with a wide range of MINI-Z optional parts. With its dynamic maneuverability display model finish, the updated MR-04 chassis takes the authentic R/C experience to a higher level.
●Authentic EP (electric) small scale R/C car that can be driven indoors.
●Readyset package includes fully assembled chassis, body and transmitter.
●Includes ultra reliable multi-function Syncro KT-531P transmitter.
●Features the MR-04 chassis, a major evolution from the previous MR-03 model.
●Includes high-quality painted body with decals applied, finished to display model standard.
●Compatible with all bodies for the MINI-Z racer series. *Motor case and differential gear assembly suitable for the body are required separately.
●Geared differential (gear diff) delivers smooth cornering.
●Full ball bearing specifications
●Can be fitted with an optional gyro unit (MZW711) for even easier control. Gyro sensitivity can be adjusted using the volume on the chassis.
●Compatible with wide range of MINI-Z Racer optional parts so you can enjoy tuning and enhancing your model.
Sent from supplier 4-8 day delivery
AWD series is a Four Wheel Drive chassis with Drift tires and paired with the
Syncro KT-531P Transmitter. Perfect for drifting in small spaces.
To bring its dynamic performance to even more drivers, the MINI-Z AWD is now available in a Readyset. The MA-020 chassis features VCS (variable camber suspension) on the front that optimizes camber change with suspension stroke and a specially designed circuit board. The chassis design allows space for installing the optional gyro unit(Sold separately:No.MZW446). The gyro can be adjusted by turning a small volume on the chassis to reflect the amount of steering correction in response to changes in chassis posture, allowing beginners through to experts to drive to their full potential. Fully fitted out with precision ball bearings, the high drive efficiency of the MA-020 chassis is complimented in the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that requires no frequency band setting; all at a great value price. Simply set the batteries to enjoy the thrill of drift driving with the included set of drift tires. The chassis is compatible with nearly all ASC MINI-Z bodies (additional parts maybe required for some body styles). The MINI-Z AWD promises a unique world of dramatic racing action for you to experience and enjoy.
●MINI-Z AWD Readyset based on MA-020 chassis.
●Special circuit board updated with optimized steering control program.
●Chassis features gyro sensitivity adjustment function.
●Drift tires are installed as standard.
●Readyset requires only batteries to be ready for action!
●Features 2.4GHz Syncro KT-531P transmitter that requires no setup of frequency bands.
●Factory completed body comes with display model quality finish.
●Features VCS (variable camber suspension) that adjusts camber in accordance with suspension stroke.
●Coil spring on front suspension can be easily replaced without tools.
●wide range of optional parts is available to be installed.
●Note) Optional ICS can NOT be used. Also, this model is specially designed for the KT-531P transmitter. It is not compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is only compatible with the special gyro unit (sold separately:No.MZW446).
Sent from supplier 4-8 day delivery
AWD series is a Four Wheel Drive chassis with Drift tires and paired with the
Syncro KT-531P Transmitter. Perfect for drifting in small spaces.
To bring its dynamic performance to even more drivers, the MINI-Z AWD is now available in a Readyset. The MA-020 chassis features VCS (variable camber suspension) on the front that optimizes camber change with suspension stroke and a specially designed circuit board. The chassis design allows space for installing the optional gyro unit(Sold separately:MZW446>here for gyro support). The gyro can be adjusted by turning a small volume on the chassis to reflect the amount of steering correction in response to changes in chassis posture, allowing beginners through to experts to drive to their full potential. Fully fitted out with precision ball bearings, the high drive efficiency of the MA-020 chassis is complimented in the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that requires no frequency band setting; all at a great value price. Simply set the batteries to enjoy the thrill of drift driving with the included set of drift tires. The chassis is compatible with nearly all ASC MINI-Z bodies (additional parts maybe required for some body styles). The MINI-Z AWD promises a unique world of dramatic racing action for you to experience and enjoy.
●MINI-Z AWD Readyset based on MA-020 chassis.
●Special circuit board updated with optimized steering control program.
●Chassis features gyro sensitivity adjustment function.
●Drift tires are installed as standard.
●Readyset requires only batteries to be ready for action!
●Features 2.4GHz Syncro KT-531P transmitter that requires no setup of frequency bands.
●Factory completed body comes with display model quality finish.
●Features VCS (variable camber suspension) that adjusts camber in accordance with suspension stroke.
●Coil spring on front suspension can be easily replaced without tools.
●wide range of optional parts is available to be installed.
●Note) Optional ICS can NOT be used. Also, this model is specially designed for the KT-531P transmitter. It is not compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is only compatible with the special gyro unit (sold separately:MZW446).
<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool
＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
Sent from supplier 4-8 day delivery
AWD series is a Four Wheel Drive chassis with Drift tires and paired with the Syncro KT-531P Transmitter is perfect for drifting in small spaces.
To bring its dynamic performance to even more drivers, the MINI-Z AWD is now available in a Readyset. The MA-020 chassis features VCS (variable camber suspension) on the front that optimizes camber change with suspension stroke and a specially designed circuit board. The chassis design allows space for installing the optional gyro unit(Sold separately:No.MZW446).
The gyro can be adjusted by turning a small volume on the chassis to reflect the amount of steering correction in response to changes in chassis posture, allowing beginners through to experts to drive to their full potential. Fully fitted out with precision ball bearings, the high drive efficiency of the MA-020 chassis is complimented in the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that requires no frequency band setting; all at a great value price.
Simply set the batteries to enjoy the thrill of drift driving with the included set of drift tires. The chassis is compatible with nearly all ASC MINI-Z bodies (additional parts maybe required for some body styles). The MINI-Z AWD promises a unique world of dramatic racing action for you to experience and enjoy.
Sent from supplier 4-8 day delivery
The ultimate revival! Get ready for the resurgence of Kyosho s famous Scorpion! In the spirit of the original but with upgrades throughout!
The legendary Kyosho Scorpion is credited with taking the racing buggy category into the realm of pure motorsports. Even after 30 years since it was first released in 1982, the indelible mark of the Scorpion still exists with its many fans around the world. Kyosho is proud to renew this machine to all its former glory! While maintaining the wild and free spirit of the original baja buggy style and chassis layout, the 2014 version features the latest in performance technology and sacrifices nothing in speed and endurance on modern buggy racing tracks. Externally it may look like the original Scorpion with its semi-trailing suspension arms, but the advanced 6061T6 forged aluminum material delivers futuristic levels of strength, rigidity and durability. Following the original design, the Scorpion 2014 features a new two-piece die-cast aluminum gearbox with differential gears. In addition, the included slipper clutch protects the transmission as well as delivers efficient traction that takes the Scorpion s control feel and durability to a new higher level. Precision 48 pitch gears reduce traction pulsation for direct driving control characteristics while the flat under surface of the countersunk chassis has no protruding screw heads for minimal contact resistance and scraping, resulting in higher durability. Stainless shafts combine with aluminum cylinders in the oil shocks for smooth stroke from top to bottom and running performance worthy of a true racing buggy. Like the original Scorpion, the 2014 version is packaged as an unassembled kit, but nearly all tapping screws and nuts have been replaced with the improved lightweight and security a hex screws. From expert racers who knew the magic of the original Scorpion to modern-day racers, discover for yourself why the Scorpion 2014 commands such respect!
●Revival of the famous Kyosho Scorpion. High performance upgrades are featured throughout the 2014 version.
●Kit with pre-assembled gearbox and oil shocks (to be installed).
●Countersunk surface allows screws to be seated flat.
●Lightweight design reduces use of nuts and tapping screws.
●Ball diff from Ultima RB can be installed as an optional upgrade.
Required for Operation:
●2-ch, 1-servo R/C system for cars
●540-class motor (30-27 turns recommended)
●ESC compatible with motor
●Battery pack for chassis
●Battery charger
●Paint for painting the polycarbonate body
●Batteries for R/C transmitter
●Tools (1.5, 2.0, 3.0mm hex wrench)
Sent from supplier 4-8 day delivery
There is no denying the impact the Maverick Quantum family has had on the world of RC bashing! In no time at all the Quantum FLUX trucks have earned a fantastic reputation with fans on a quest to push these vehicles harder, faster, higher and longer! Inspired by all the fun you guys are having - we’ve committed to keep developing and advancing these vehicles as fast as customers keep blasting them!!
The upgraded Maverick Quantum MT FLUX 80A is a rugged 4WD Shaft-Driven, monster truck with a high ground clearance chassis design and high ride height suspension set up for clambering over any terrain! With independent Double Wishbone Suspension, Oil Filled Adjustable Coilover Shocks and Tough Metal 4-Gear Differentials Front & Rear, no amount of dirt or jumps will stand in your way!
Pushing the boundries of quality and performance further than ever before seen with Maverick brand, the whole range of Quantum kits benefit from a new Molded Tub Chassis with Hex Pattern Reinforcement, oversized 2.8" wheel design and an adjustable wheelie bar fitted as standard.
The newly upgraded Quantum FLUX 80A kits come preloaded with the same great MM-3660-BL 3300KV Brushless Motor complete with 5.0mm Shaft powering a tough shaft drivetrain spinning all 4 wheels for awesome 4WD action. While there's a step up in power with the waterproof 80AMP FLX10-3S80 ESC ready to pump up to 80 amps of power to the motor for amazing stunts, colossal top speeds, and wheel-spinning sideways action!
The waterproof ESC, waterproof receiver, water-resistant servo, and covered spur gear mean the fun keeps coming and water or debris won't stand in your way!
We're proud to announce the fantastic Quantum range features the first two tires in our new TREDZ range. Fully bespoke with compound, profile and tread patterns that are designed and specified by HPI Racing. Wrapped in high quality, high grip rubber.
Tredz Tires by HPI Racing are also available to purchase to upgrade the look and performance of any RC vehicle with 12mm Hex Hub wheel fittings. Look out for more tires joining the Tredz family soon!
4WD shaft drive
HD Front Universal Drive Shafts & Rear Wheel Axle Shafts
Aluminum Hex Hubs
3300KV Brushless Motor with 5.0mm Shaft
Independent Double Wishbone Suspension
Oil Filled Adjustable Coilover Shocks
Pillow Ball Front & Rear Suspension Uprights
Adjustable Steel Turnbuckle Links
Tough Metal 4-Gear Differentials Front & Rear
Gear cover to keep debris away from the spur gear
Dual Point Bell Crank Steering System With Integrated Servo Saver
Molded Tub Chassis with Hex Pattern Reinforcement
High Ground Clearance Chassis Design
Enclosed Receiver Box Protects from the Elements
Complete Set of Ball Bearings
Adjustable Wheelie Bar Included
Oversized 2.8" Wheel Design
Standard 12mm Hex Hub Wheel Fitting
TREDZ High Grip Tires
2.4GHz Radio Set with Waterproof Receiver
80A Waterproof ESC and Water-Resistant Servo
3S LiPo Capable
Specification:
Length: 475mm
Width: 365mm
Height: 200mm
Wheelbase: 285mm
Weight: 2.10kg
Items Required:
4 x AA Batteries fot transmitter
2S or 3S LiPo pack with T-plug - HPI Recommends #160161 2S LiPo or #160163 3S LiPo
Sent from supplier 4-8 day delivery
The Venture is the ultimate adventure-ready scale RC trail truck, and now it's available in a build-it-yourself version, ready for you to completely customize into your ultimate off-road vehicle. Developed from the ground up to be the most advanced and driver-friendly scaler truck available, the Venture is the perfect trail companion for anyone from weekend ramblers to globe-trotting adventure heroes! Whether you're driving up a mountain, crossing rocky streams or just taking it on a trail drive, the Venture can handle it all.
To make the Venture the best in class scale truck, the chassis features a formed steel chassis that encloses a realistic front-motor position with an all metal-gear transmission and full-time 4WD drivetrain with a central transfer case, plus a scale suspension featuring dual stage, oil-filled, coil-over shocks and sturdy off-road axles with full-time locked differentials.
The build-it-yourself Venture SBK includes official HPI options such as rebuildable front universal driveshafts, aluminum lower links for confidence over rough terrain, 4-link rear for increased articulation and traction, plus hidden axle weights for increased stability with a lowered center of gravity (CG). As you assemble the kit from the fully detailed assembly instructions, you can modify the truck if you wish, or add extra options and accessories as you go.
The Venture Scale Builder Kit is supplied in kit form only, ready for your own choice of motor, servo, speed controller, wheels, tires, body, and bumpers, so YOU can instantly have the most customized truck possible. Are you looking for the pre-built and Ready To Run (RTR) version of the Venture? Check out the #118146 Matte Black, #116558 Gunmetal, or #117165 Sandstorm RTR Venture trucks!
Full-time 4WD 1/10 scale off-road truck kit - you build yourself!
Formed steel C-channel chassis rails
Front and rear bumper mounts to fit bumpers of your choice
Adjustable rock rail side sliders help the truck get over tough obstacles
Front-mount motor and transmission position for ultimate scale realism
Front weight bias improves climbing traction and provides more realistic driving
All-metal gear drivetrain for extreme durability
Central transfer case with slider driveshafts to front and rear differentials
Transfer case prevents motor stall for the best climbing action
Transfer case also straightens & lowers center driveshafts for more efficient power transfer
Axles feature small diff case or "pumpkin" size for best possible ground clearance
Aluminum differential pumpkin covers
Locked differentials for superb off-road climbing traction
12mm aluminum hex hubs to fit any available crawler wheels
Shock towers have multiple mounting positions to allow for wheelbase options
BTA (Behind The Axle) steering linkage for improved approach and departure angles
Panhard bar for scale looks and optimized geometry with zero bump steer
Zero Ackermann high steer knuckle design for improved obstacle clearance and tighter turning radius
3-link front triangulated suspension
4-link rear triangulated suspension
Oil-filled aluminum coil-over shock absorbers (63-90mm stroke)
Adjustable threaded shock bodies for quick ride height changes
Dual-stage shock springs
Aluminum lower link/shock mounts
Aluminum Panhard mounts
CMS (Chassis Mounted Servo) realistic steering setup
Adjustable body mounting to fit any style of off-road body (truck or SUV)
Fully braced rear body mounts
Full set of ball bearings
Protective case for receiver
Antenna mount
with #117365 FJ Cruiser body and #116852 & #116853 bumper Type 1 sets
Length: 527mm (20.7")
Width: 227mm (9")
Height: 238mm (9.4") with roof rack, 217mm (8.5") without (will vary depending on tire choice and suspension settings)
Wheelbase: 311mm (12.3")
Front overhang: 101mm (3.9")
Rear overhang: 135mm (5.3")
WEIGHT
Running weight: 2.4kg (5.3lbs) (approximate - will vary depending on your choice of electronics)
CAPABILITY
with #116852 & #116853 bumper Type 1 sets - will vary depending on your choice of bumpers
Break-over angle: 44.5 degrees
Approach angle: 55 deg
Departure angle: 45.5 deg
Max climb angle: 49 deg
Max tilt angle: 28 deg
Axle articulation: 30 deg
Ground clearance 68mm capable: (2.7")
Ground clearance at standard ride height 60mm: (2.4")
Axle ground clearance 32mm: (1.3")
GEARING
Drivetrain ratio: 7.6:1
Transmission gearing: 1.53:1
Axle gearing: 3.31:1
Transfer case gearing: 1.5:1
What you need to complete this kit:
Your choice of scale body - 12.3" (313mm) wheelbase fits perfectly, other wheelbases will require changing the links to suit
Front and rear bumpers to match your choice of body
Scale crawler tires and wheels (we suggest 1.9" wheels for the best fit)
Brushed or brushless motor (we suggest a high turn brushed motor or equivalent brushless motor)
Electronic speed control to suit your choice of motor
High torque standard size steering servo
Radio system with receiver
Battery for truck (with suitable plug for your speed controller)
Batteries for radio transmitter
Sent from supplier 4-8 day delivery
Introducing the Venture Wayfinder, an RC trail truck that embodies the spirit of exploration. The HPI Venture is your steadfast companion, ready to traverse mountains, streams and beyond. It's not just a vehicle, it's a trusted ally for your weekend jaunts or grand explorations!
The Venture combines a realistic front-motor position and formed steel C-channel chassis rails with a realistic suspension and drivetrain. The new Wayfinder body augments the Venture framework, resulting in a unique off-road experience we're proud to provide. The Wayfinder body is meticulously crafted and available in two distinctive color options - a glossy metallic Gunmetal and a vibrant metallic Orange. The design details extend beyond the primary coloring, featuring black accents that embellish the arch extenders and sills creating a striking contrast.
Clear windows provide a realistic look, adding an extra layer of authenticity to the model. With front and rear bumpers, mirrors, a functional roof rack, and a swing-away spare tire mount, the Venture provides an authentic trail experience.
Several Optional parts are now standard equipment. Including the Aluminum lower link set, Aluminum rear 4 link and Universal front driveshafts. The vehicle’s performance is further enhanced by authentically scaled oil-filled shock absorbers and full-time locked differentials, paired with realistically treaded tires, ensuring dependable handling in all off-road conditions.
Sent from supplier 4-8 day delivery
Introducing the HPI Racing Venture18 – your ultimate companion for off-road adventure and exploration. Like its bigger brother, the Venture18 combines a tough formed steel C-channel chassis with a realistic suspension and drivetrain. Despite its compact size, this truck is packed with impressive features, including a new all-metal 2-speed transmission, 4-link front and rear suspension, and universal telescopic counter-rotating driveshafts. With authentically scaled oil-filled shock absorbers and full-time locked differentials, the Venture18 offers dependable handling in all off-road conditions.
The Venture18 also marks the return of officially licensed Toyota products to the HPI Racing lineup. The meticulously crafted 1985 Toyota Hilux SR5 body features a clipless polycarbonate body, and it’s available in two striking color options – a Gloss Black and a vibrant Gloss Red with a bold stripe kit. The body is prepainted and also features clear windows, plus scale accents like Toyota emblems, front grill, door handles, wipers, functional mirrors, plus tube-style bumpers and rollbars for an impressive level of realism. The fitted LED light kit enhances the authenticity even further, giving the Venture18 that extra layer of detail that truly stands out!
The Venture18 is fully Ready-to-Run (RTR) and includes a 600mAh LiPo battery pack plus a convenient USB balance charger that allows you to charge up anywhere, you can take the Venture18 on your next adventure and experience the thrill of off-road exploration like never before. It’s more than just a toy – it’s a vehicle for freedom, fun, and the spirit of adventure.
Gear up, hit the trails, and let your adVenture begin!
Sent from supplier 4-8 day delivery
HPI-Racing is proud to introduce latest addition to the Sport 3 line-up: a stunning replica bodyshell of the iconic BMW 2002 Turbo! This legendary car from the 1970s is not just a symbol of automotive history, but a perfect fusion of style and performance, now brought to life in 1/10th scale!
The BMW 2002 Turbo, introduced in 1973, is one of the most revered sports cars of its time. The first-ever production turbo car for BMW and any European car maker, it combined power, precision, and a distinctive style that made it an instant classic. Powered by a 2.0-liter, turbocharged engine, the 2002 Turbo was the first production BMW to feature an exhaust turbocharger, delivering exhilarating performance as well as thrilling driving dynamics. Its bold, aggressive design and racing pedigree cemented its place as a true automotive icon.
Under the hood, the 1/10th scale version of the BMW 2002 Turbo is equipped with the HPI Racing Sport 3 touring car chassis! With a full-time shaft drive, fully sealed 4WD drivetrain, waterproof electronics, 2.4GHz radio gear, fully independent double wishbone suspension and adjustable oil-filled shocks it’s Ready to Rock in all conditions. It's got plenty of power for 4-wheel drifts and jaw-dropping speeds at the pull of a trigger!
This officially licensed, meticulously crafted body captures the spirit of the original, featuring its aggressive front end, distinctive side stripes, and iconic "Turbo" badge. It’s a perfect tribute to the car that defined the performance hatchback era, now brought to life for RC enthusiasts.
Whether you're a classic car enthusiast, an experienced RC hobbyist, or simply someone who enjoys the thrill of RC driving, the HPI Racing Sport 3 with the BMW 2002 Turbo bodyshell delivers.
Embrace the legacy and drive the legend - on and off the track.
Sent from supplier 4-8 day delivery
HPI large scale fans, we have heard you! The one and only original HPI Baja 5B is BACK and ready for you to build from the ground up! The HPI SBK collection of Self Build Kits grows with the addition of not just one, but TWO 1/5th scale HPI kits! Fans of electric off-road RC will be super excited to build their own brushless-powered 1/5th scale with the HPI Baja 5B FLUX Self Build Kit!
When the HPI Baja 5B buggy was first introduced, large scale RC was very expensive and quite difficult for the average RC hobbyist to experience. Using highly durable parts and innovative design features, HPI brought large scale off-road to new enthusiasts and ushered in a new, BIGGER era of RC!
Now, YOU can build and own the legend! Experience the thrill and excitement of building a car which ends up being over 80cm (nearly 32 inches) long and weighing nearly 10kg (over 21 lb)! Just install your own electronics as you build the Baja 5B FLUX and you'll be ready for any adventure that comes your way!
With extra-tough drivetrain parts taken straight from the gasoline-powered version such as the viscous torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the Baja 5B FLUX is ready for up to 8S of raw LiPo power, so you can see speeds of over 50 miles per hour!
The Baja 5B FLUX is also equipped with extra-big and super-tough suspension parts, featuring awesome HPI durability! With its expertly designed molded composite suspension plus extra-long adjustable HD shocks, and massive high impact nylon 3-piece beadlock wheels, the Baja 5B is ready for full-speed racing on any off-road circuit!
The 4mm thick 6061 aluminum monocoque chassis fits a huge battery box and has space for the BIGGEST brushless motors you can find for RC, and also features an adjustable motor mount. Precise steering is provided by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and a sleek FLUX-specific clear polycarbonate body is included in the SBK kit, ready for your custom racing scheme!
The Baja 5B FLUX SBK is a great addition to your HPI collection, as well as a fabulous introduction to large scale buggies!
Features Summary
Unassembled 1/5th scale electric-powered Off-Road Buggy
Ready for your 6S or 8S LiPo electronics
Streamlined HPI Baja 5B Flux body design
Adjustable motor mount
Adjustable HD shock absorbers
Monocoque chassis
Low CG for superior handling
Long travel suspension
Viscous torque oil-filled gear differential
All-terrain tires
Beadlock wheels with metal insert hubs
Aluminum rear shock tower
Hard plastic skid plates
Adjustable rear wing
Quick access to all critical maintenance points
Dual bellcrank steering
Cam type servo saver
Hex socket hardware
Gunmetal anodizing
Full set of rubber-sealed ball bearings
Enclosed receiver box
Chassis Specifications
Overall Length 817mm
Height: 255mm
Width: Front - 460mm; Rear - 480mm
Tire Track (to center of tires): Front - 395mm; Rear - 400mm
Wheelbase: 570mm
Ride Height: 76mm
Suspension Travel: Front - 95mm; Rear - 100mm
Weight: 9.6kg (21.3lb)
Adjustable Camber: front - shims; rear - screw
Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock)
Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up)
Aircraft aluminum 6061 T6 monocoque chassis
Double wishbone suspension with adjustable roll center F/R
Drive system: HD metal gears with sealed gear box (8.382:1 gear ratio)
Differential: viscous torque control with 4 pinion gears; sealed diff case with silicone oil
Shock absorber: HD Aluminum coilover shock absorber with fully adjustable preload collar
Wheel type: 3-piece beadlock design, high impact nylon material with inset heavy-duty metal hex hub
#160324 BAJA 5B FLUX SBK
1/5th Scale 2WD Electric Buggy Self Build Kit with Clear Body
SPECIFICATIONS:
Length: 817mm
Width: 480mm
Height: 255mm
Wheelbase: 562mm
Drivetrain: RWD
WHAT YOU NEED:
Radio system with transmitter, receiver and large scale steering servo
Large scale brushless motor and ESC with suitable high-current battery connectors
1 or 2 matching battery packs with suitable battery charger and connectors to match ESC
Sent from supplier 4-8 day delivery
Prepare to go Back to the Future in celebration of the film’s 35th anniversary with this newly tooled release of the most famous time machine to ever grace the screen! Inventor Doc Brown achieves the seemingly impossible when he builds a time machine.... out of a DeLorean! After being sent back in time to 1955 when an experiment with Doc’s invention goes wrong, young Marty McFly must make sure his parents get together to guarantee his existence, while enlisting the younger Doc to repair the damaged DeLorean so Marty can go Back to the Future that he hopes is still there!
This car features a removable lightning rod conductor and detailed decoration that includes the iconic OUTATIME registration plate.
The Back to the Future Delorean is arguably the most famous and recognisable car in cinema history and is now a rare collectable in real life among movie fans. Being somewhat more affordable than the real thing, this Scalextric slot car model replica is sure to be one of the biggest hits of the year for collectors young and old, not just of slot cars, but movie fans too! Grab it now, before it disappears into history.
©Universal City Studios LLC and Amblin Entertainment, Inc. All Rights Reserved.
Digital Plug Ready
Magnatraction
High Detail
Working front & rear lights
Sent from supplier 4-8 day delivery
The 2024 Monte Carlo Rally saw the stunning Ford Puma Rally1 take on the challenging alpine stages in its bold white and blue livery. Adrien Fourmaux was behind the wheel of car No. 16. The Puma Rally1 represents the cutting edge of rally technology, blending hybrid power with precision engineering to conquer the toughest terrains. Its performance at Monte Carlo was a testament to Ford’s rally heritage and Fourmaux’s rallying prowess.
This Scalextric model beautifully captures the essence of the real car, complete with authentic detailing and race markings. A must-have for rally fans and collectors, it’s your chance to bring the excitement of Monte Carlo to your track!
Sent from supplier 4-8 day delivery
Returning to the BTCC for 2021 after a number of years in the World Touring Car Series Gordon Shedden has jumped straight back into the fighting at the front of the grid with real aplomb. Despite suffering some bad luck throughout the campaign Gordon's speed has never been in doubt and he remains a driver who many fear when they spot him, lights ablaze in their mirrors. This new tool Honda Civic is the perfect opponent to our other BTCC cars and will make a great addition to any BTCC Scalextric grid.
Sent from supplier 4-8 day delivery
Conquer the rally stages with the Ford Puma Rally1 driven by Tanak/Jarveoja at the Monte Carlo Rally in 2023! This high-performance Scalextric car combines rally-bred agility with cutting-edge technology, delivering adrenaline-fueled excitement with every twist and turn.
From its rugged exterior to its turbocharged engine, every aspect of the Puma Rally1 was designed to dominate the competition. So buckle up, grip the wheel tight, and get ready to push the limits of performance as you race towards victory.
Sent from supplier 4-8 day delivery
Juha Kankkunen drove this amazing Escort WRC to a fine second place on the 1998 Monte Carlo rally. Available with real four-wheel drive, this Escort is sure to fly!
Sent from supplier 4-8 day delivery
Extending your Scalextric layout has never been easier! The seven Scalextric Track Extension Packs are totally flexible in their design and any of these packs can be added to both Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts.
One or more Track Extension Packs can be added to the same circuit, or you could use all the Track Extension Packs to make a hugely impressive circuit incorporating all the featured track pieces! The reverse side of the packaging explains how the Track Extension Pack can be incorporated into any number of layouts.
Features 'One size fits all' concept ; Compatible with Digital and Standard sets contents; Fits any sized layout; Contents: 2 x Racing Curves, Borders and Barriers. Please note: The Leap Ramp pieces found in Track Extension Pack 2 and the Ultimate Extension Pack are not suitable for Digital Circuits.
Sent from supplier 4-8 day delivery
Feel the rush of rally racing with the Subaru Impreza WRX driven by Carlos Sainz in 1995. Known for its agility and robust performance, this Scalextric car pays tribute to Sainz's skill and determination on the world stage.
Every detail, from the iconic blue and gold livery to the rugged stance and precision engineering, captures the essence of Subaru's dominance in rallying. Whether you're navigating tight corners or accelerating down straightaways, the Subaru Impreza WRX delivers unparalleled excitement and handling.
Experience the thrill of rallying's golden era with this iconic Scalextric model.
Sent from supplier 4-8 day delivery
Rally racing is back with a bang at Scalextric! Harness the power of this tech-savvy motorsport and recreate iconic races on your home tracks. Connect to your phone for the most intense Scalextric race of your life! If you’ve been looking for a way to elevate your slot car challenges, then Hot Laps might be the race set for you! Take this high-octane sport into the digital era!
Scalextric is pleased to unveil the Ford Puma WRC Hot Laps race set. The FIA World Rally Championship pits drivers, co-drivers and hybrid-powered production-based cars against some of the most brutally tough and unforgiving terrains on the planet. Now, this unique set, developed by Scalextric in collaboration with M-Sport, brings the high-octane, turbocharged twists and turns of Rally to your home. Celebrate the resurgence of rallying and recreate the excitement of each rally stage with this incredible set featuring two of the most striking and recognisable cars of the current rally era. All brought to life with the introduction of Hot Laps technology!
Scalextric Hot Laps brings back the thrill of retro rally arcade racing games with an interactive lap counter and checkpoint racing app, combining the best bits from the world of slot racing and arcade gaming to create an exciting slot racing experience for the home. Hot Laps amps up the racing fun, without the need for extra hardware, so it is fully compatible with existing tracks and cars. Simply place your smart device onto the cardboard race gantry included and select your preferred race mode. The camera on the device uses motion detection so when the car zooms under the gantry the app counts a lap - super easy and tons of fun!
Thanks to this setup system set in elegant black, which was specially designed for 1/10 buggies, almost all important parameters can be optimized conveniently and easily.
After all, the better a RC car is set up, the more fun it gets when racing on the next track.
Adjustable Parameters: Camber (+/- 10°), Toe (+/- 40°), Caster (+/- 20°), Steering
Includes: 4x Measurement gauges for each suspension, 1x Toe gauge
Experience the next level of charging with SkyRC D100neo, the latest and upgraded version of D100 charger, packed with innovative features and improved functionality.
Featuring two charging ports, SkyRC D100neo delivers a total power of 200W and 10A per port, allowing simultaneous charging of multiple chemistry batteries. With a balance current of 1000mA per cell, it speeds up balancing among battery cells, enhancing the charging process. The high precision balancer ensures impressive accuracy of ±0.02V, optimizing voltage equalization.
Whether you're a seasoned professional or a passionate hobbyist, this charger takes your RC charging to new heights.
Outrageous performance is packed through 2 Independent ports in the compact footprint.
You can simultaneously charge two RC batteries with two ports, even in different chemistry. Whether you need to power up your RC car or fly a drone, D100neo has you covered!
Despite its small size, the D100neo doesn't compromise on power or efficiency with up to 200W on an output! The charger boasts a vibrant color display featuring a remarkable 76,800 pixels, surpassing the 8,192-pixel black white screen of the D100.
With exceptional versatility, D100neo can charge a wide range of battery chemistries. This powerhouse can charge from LiPo and LiFe to Li-ion, LiHV, Pb, NiMH, and NiCd.
You are turbocharging your time with a single charger that can handle multiple battery types.
Whether you're an RC guru, a beginner, or somewhere in between, D100neo is the reliable and adaptable choice that ensures optimal performance for all your batteries.
Unlock the full potential of your battery arsenal with D100neo – versatility multiplied capability.
D100neo is designed to provide RC enthusiasts unparalleled flexibility in the garage or out in the field. With dual port input, you have the freedom to choose between AC or DC input based on your specific scenarios.
In AC mode, the charging power reaches an impressive overall 100W, dynamically distributing to each port.When powered by DC, the charger unleashes its true potential, offering an astounding overall 200W of charging power. With a single port capable of reaching up to 100W, you can power up your batteries with remarkable speed and precision.
Whether you are a beginner or a seasoned RC guru engaging in racing, D100neo ensures efficient charging and optimal performance for your RC batteries.
Sent from supplier 4-8 day delivery
Features:
- 4WD shaft drive
- Independent double wishbone suspension
- Adjustable Coilover Shocks
- 4-Gear Differentials Front & Rear
- Gear cover to keep debris away from the spur gear
- Dual Point Bell Crank Steering System
- Servo Saver Built into Servo Horn
- Complete Set of Ball Bearings
- Splashproof Electronics
- Brushed electric 390 motor
- 2.4GHz Radio with 2 in 1 ESC/Receiver
- Li-Ion 7.4V 1500mAh Battery w/ T-Plug connector
- USB Charger included
- LED Roof Light fitted to Body
- Front LED Lights included in box (customer to fit if desired)
- Speed Limiter using Speed Dial on Transmitter
- Top speed 27km/h (17mph)
Specification:
Length: 395mm
Width: 255mm
Height:160mm
Wheelbase: 240mm
Wheel Diameter: 95mm
Wheel Width: 35mm
Items Required:
3 x AA Batteries for transmitter
Sent from supplier 4-8 day delivery
BlackZon SMYTER DT - Desert Truck
For that extra downforce for blasting over rocks and dunes, the Desert Truck gives you the all-terrain racing edge while its aggressive body style and grippy tires make the DT as good to look at as it is to drive
Features:
- 4WD shaft drive
- Independent double wishbone suspension
- Adjustable Coilover Shocks
- 4-Gear Differentials Front & Rear
- Gear cover to keep debris away from the spur gear
- Dual Point Bell Crank Steering System
- Servo Saver Built into Servo Horn
- Complete Set of Ball Bearings
- Splashproof Electronics
- Brushed electric 390 motor
- 2.4GHz Radio with 2 in 1 ESC/Receiver
- Li-Ion 7.4V 1500mAh Battery w/ T-Plug connector
- USB Charger included
- LED Roof Light fitted to Body
- Front LED Lights included in box (customer to fit if desired)
- Speed Limiter using Speed Dial on Transmitter
- Top speed 27km/h (17mph)
Specification:
Length: 395mm
Width: 255mm
Height:160mm
Wheelbase: 240mm
Wheel Diameter: 95mm
Wheel Width: 35mm
Items Required:
3 x AA Batteries for transmitter
Sent from supplier 4-8 day delivery
Recommended for beginners
Suitable for All terrain
Splashproof Electronics
Top speed about 30km / h
Required for operation: Batteries for controller (2 x AA)
Today we"re launching the ideal first Monster Truck for any RC beginner looking to take their first steps (and even jumps!) into our great hobby! The 1:16th scale Slyder from our BlackZon brand is small in size but BIG on fun!!
The BlackZon Slyder is perfect for getting a taste of RC jumping, performing stunts, bashing (and crashing!) ...Simply charge n" go and keep coming back for more!
Sent from supplier 4-8 day delivery
Introducing the HPI Racing Venture18 – your ultimate companion for off-road adventure and exploration. Like its bigger brother, the Venture18 combines a tough formed steel C-channel chassis with a realistic suspension and drivetrain. Despite its compact size, this truck is packed with impressive features, including a new all-metal 2-speed transmission, 4-link front and rear suspension, and universal telescopic counter-rotating driveshafts. With authentically scaled oil-filled shock absorbers and full-time locked differentials, the Venture18 offers dependable handling in all off-road conditions.
The Venture18 also marks the return of officially licensed Toyota products to the HPI Racing lineup. The meticulously crafted 1985 Toyota Hilux SR5 body features a clipless polycarbonate body, and it’s available in two striking color options – a Gloss Black and a vibrant Gloss Red with a bold stripe kit. The body is prepainted and also features clear windows, plus scale accents like Toyota emblems, front grill, door handles, wipers, functional mirrors, plus tube-style bumpers and rollbars for an impressive level of realism. The fitted LED light kit enhances the authenticity even further, giving the Venture18 that extra layer of detail that truly stands out!
The Venture18 is fully Ready-to-Run (RTR) and includes a 600mAh LiPo battery pack plus a convenient USB balance charger that allows you to charge up anywhere, you can take the Venture18 on your next adventure and experience the thrill of off-road exploration like never before. It’s more than just a toy – it’s a vehicle for freedom, fun, and the spirit of adventure.
Gear up, hit the trails, and let your adVenture begin!
What's the FIRST thing new RC drivers want? MORE SPEED! That's why the new Blackzon Smyter TURBO DT and DB are here - fitted with a powerful BRUSHLESS MOTOR system for extra power, performance and FUN!
4WD shaft drive Desert Buggy
3S-capable Brushless System
Adjustable Oil-Filled Coilover Shocks
4-Gear Steel Differentials Front & Rear
Metal Driveshafts & Hex Hubs Front & Rear
Independent double wishbone suspension
Gear cover to keep debris away from the spur gear
Dual Point Bell Crank Steering System
Servo Saver Built into Servo Horn
Complete Set of Ball Bearings
Splashproof Electronics
2.4GHz Radio with 2 in 1 ESC/Receiver
Li-Po 7.4V 1600mAh Battery w/ T-Plug connector
USB Charger included
LED Roof Light fitted to Body
Front LED Lights included in box (customer to fit if desired)
Speed Limiter using Speed Dial on Transmitter
3S Battery & Charger available as options soon
Top speed 2S: 45km/h (28mph)
Top speed 3S: 70km/h (43mph)
Specification:
Length: 395mm
Width: 255mm
Height:160mm
Wheelbase: 240mm
Wheel Diameter: 95mm
Wheel Width: 35mm
Items Required:
3 x AA Batteries for transmitter - HPI Recommends #101939 Plazma AA Batteries
The latest Tire Warmer with the silicone warming cup makes the heating more evenly, gives better heat preservation. Preheating the rubber tire surface increases the rubber's friction coefficient and enhances its grip on the track surface. Racing for RC hobbyists is made easy! SkyRC Tire Warmer will definitely give you the advantage of tire-readiness whenever you roll out onto the track.
With a nonstop passion for RC car racing, SkyRC upgraded its mechanical predecessor with Bluetooth.
The must-have RC Gears app definitely brings smartness to this gauge. Now our racers can measure the RC car's camber and toe angle and read the data on the phone and on the fly!
RC suspension tuning made easy and smarter!
When it comes to RC grade racing, so many adjustments can contribute to the handling and performance of the vehicle.
Adjusting Camber and Toe are vital adjustments to affect how your touring car performs on the straights and the turns.
Toe In/Toe Out can be adjusted to increase or decrease steering and steering response.
Camber is the relationship of the tire to the ground, such that a tire that is perpendicular to the racing surface has zero camber. If the top of the tire leans in toward the car, it has negative camber; likewise, a tire that leans outward at the top has positive camber. Most RC touring cars will benefit from a negative camber degree, resulting in a slightly wider width and more static tire grip on the track surface, benefiting the turns and reducing roll-overs.
On your setup wheels, in your race wheels, or next to your setup station,SkyRC Digital Camber Gauge will give you incredibly accurate readings on the camber angle of your wheels.
The toe-tuning and camber-adjusting allow you to achieve your perfect tire wear and traction point.
This accurate gauge allows you to tweak your camber and camber gain settings, finding peace of mind that you are following a precise, replicable and trustworthy measurement tool.
All data can be read and kept on the phone!
Stop wondering how fast your RC car can run and how high your RC Airplane or helicopter can fly. Now all these data come at your finger with the GPS SPEED METER by SkyRC.
The popularity of GPS devices inspired SkyRC to design this gadget at about 41g. The Speed Meter is the result of SkyRC’s ongoing development efforts, boasting an ultra‐compact GPS module with hidden antenna design, the high‐sensitivity GPS receiver chip can do quick positioning, a robust controller IC to keep recording speed and altitude in real time.
This gadget is ideal for RC racing/flying and casual biking, driving and long journey. User could easily view the screen while working out data such as speed, altitude total mileage/ kilometer, longitude/latitude.
The gadget records the top speed and top altitude for instant recall after the running. It will help RC fans much to fine‐tune their RC gadgets to achieve better performance.
Receiver
L1, 1575.42 MHZ
Frequency
1.023 MHZ
Update frequency
1 Hz.
Antenna type
Built-in
Satellite signal reception sensitivity
-159dBm
Dimensions
65.7X39.6X20.8mm
Weight
41g
Operating temperature
0℃ to +50℃
Storage temperature
-10℃ to +60℃
Operating humidety
5% to 90%
SKYRC TORO TS160 Pro 160A Brushless Sensored ESC 6V 7.4V BEC Brushless ESC for 1/10 Touring Car 1/10 Buggy 1/10 Crawlers
Features :
Features:
1.Easy setting by app control.
2.Monitor the real-time racing data via the app.
3.Boost Timing Activation: RPM Mode & Throttle Mode.
4.Aluminum enclosure with better heat dissipation.
5.Switch automatically between Sensor and Sensorless modes.
6.With Overvoltage Protection,Low Voltage Protection,Motor Stall Protection,Over Temperature Protection.
7.Built-in BEC, outputting acurrent of up to 15A at voltages switchable between 6.0 and 7.4V.It eliminates the need for a separate battery to power various standard and high-voltage servos and peripherals!
8.The RC Gear app supports four languages: Chinese, English, Japanese, and German.
Description:
Supercharged by the high-performance chip from STMicroelectronics, TS160 Pro ESC takes its power and efficiency further than ever.
The proprietary optimized algorithm makes the speed controller snappy and responsive precise and sophisticated computing. For 1/10 RC Cars, TS160 Pro is definitely a Pro ESC
Specifications:
Brand: SKYRC
Item name: TS160 Pro ESC
Item NO.: SK-300078
Constant/Peak Current: 160A/850A
BEC Output: 6V or 7.4V Adjustable
Compatible Motor: Brushless Sensored & Sensorless Motor
Compatible Car: 1/10 Touring Car, 1/10 Buggy, 1/10 Crawlers
Motor Turns: 1/10 Touring Car ≥4.5T,1/10 Buggy ≥5.5T
Battery Cell: 2-3S LiPo/ 6-9S NiMH
ESC Programming: RC Gears app
Net Weight: 97g
Operation Temperature: -10℃~40℃
Storage Temperature: -20℃~50℃
Package included:
1x TS160 Pro ESC
Thanks to the 200 MHz ARM Microcontroller, the deployed Oversampling Technology can improve ADC Resolution to 16bit. The efficient PID mechanism can fine-tune the current to increase response speed and the charge current accuracy.
Get ready to work, play, and race with SkyRC T1000 to pump the speed and power beyond you ever imagined!
Your battery packs have been fully charged while you are still brewing coffee!
That is how you get supercharged by co-designing hardware, software, and MCU.
Dual ports work independently to charge two battery packs efficiently and simultaneously. RC hobbyists can flexibly choose AC or DC input according to the scenarios.
In AC mode, the charging power is up to 450W, while the performance is even more powerful, up to 1000W in DC mode. Whether you are a beginner or an RC guru engaging in racing, it is the charger to push the limits of what is possible!
When a single port works, the T1000 will be pumping full power into that port! The charging power is dynamically and intelligently distributed in the circumstance that two ports work at the same time. Whenever either port finishes working, the other port will fully charge at full power. The total power is always used intelligently and efficiently! Charging is so flexible!
T1000 is not only professional in charging but also can act as a digital power supply.
After clicks on the menu, T1000 is ready for your application, offering an optimal voltage of 5-27V with 0.1V increment, adjustable 1-15A current. Short circuit, Overload, and Reverse polarity protection are all included!
Discover a new ColorX interface introduced by T1000 based on simple and textured visuals! The tailor-designed light cyan and green color scheme is for RC charging. It helps you focus on the setting. The Web2.0 responsive menu and well-designed icons make the operation more suitable for players accustomed to operating smartphones! Time to say bye-bye to dull typography and welcome bold and beautiful brand-new UI. Charging doesn't have to be boring, and neither does life!
Within the sleek enclosure lies a groundbreaking thermal system designed to let Arm Cortex-M4 fly through heavy workloads at screaming-fast speeds — and stay whisper quiet. The fan will adjust the speed accordingly and dissipate heat more effectively according to the different power usage.
With the classic, minimal, and sleek vertical tower design, T1000 frees up more bench space for RC hobbyists to tweak gadgets by taking the footprints of a pair of battery packs. Sleek design serves your charging and delights your charging!
The ergonomic handle makes it easy to store, carry, and travel with.
Input Voltage
AC
100-240V (50/60Hz)
DC
10-30V
Input current
35A max
Charge power
AC
450W max
DC
1000W max
Discharge power
Main port
10W
Balance port
37W max
External discharge
350W max
Charge current
LiPo/LiFe/LiIon/LiH V/NiM H/NiCd/Pb
0.1-20.OA
parallel
20.0-35.OA
Discharge current
LiPo/LiFe/LiIon/LiH V/NiM H/NiCd/Pb
0.1-2.OA
External discharge
*Working with external discharger BD350
which can be purchased separately.
0.1-40.OA
Balance current
LiPo/LiFe/LiIon/LiH V
1.5A max
Battery type
LiPo/LiFe/LiIon/LiH V
1-6S
NiMH/NiCd
4-15S
Pb
3S/6S/12S
Operation
LiPo/LiFe/LiIon/LiH V
Balance, Charge, Discharge, Storage, Parallel
NiMH/NiCd
Charge, Cycle, Re-peak, Discharge
Pb
Normal, AGM charge, Cold charge, Discharge
DC Output
Voltage
5-27V
current
1.0-15.0A
Size
L*W*H
190.3*153.5*100 mm
Weight
1370 gr
Manufacturer : SkyRC
T1000 unit
AC power cord
User manual
GC-401 Three Sensor Drive Modes
L-DRIVE: More flexible and good for short distance and curved track
S-DRIVE: Standard mode
H-DRIVE: High curve, suitable for slipping and long straight distance track
Ultra-small Size & Lightweight
GC-401 gyro is leading the industry with a 21x21x11mm size and a weight of 3.6g. It can be easily mounted on all types of RC vehicles.
Correction of RC Vehicle Steering
GC-401 allows the racing car to travel in the specified direction and provides more accurate, stable, and more controllable steering at high speed.
Check or Wreck? Investing significant time and effort into your RC car is crucial, and tire balancing plays a pivotal role in ensuring your on-road adventures are safe and smooth. Neglecting tire balance can lead to erratic handling, excessive vibrations, and potential damage to essential components.
Why Are RC Tires Unbalanced? Unbalanced RC tires can be caused by various factors, including uneven tread wear, track deterioration, racing vibrations, manufacturing variations, and weight differences in tires and rims. These seemingly small discrepancies demand high-precision tools for detection, as even minor imbalances can affect your RC car's stability and performance.
Introducing the SkyRC Digital Tire Balancer:
RC Pros for RC Pros: SkyRC brings you a digital app-based tire balancer designed for RC enthusiasts who demand precision and performance.
Balance by Data, Not Guts Guesswork: Say goodbye to guesswork – this balancer offers precise, visual feedback, eliminating uncertainty for optimal RC tire balance.
Cutting-edge Technologies: Equipped with load cell technology, motorized precision control, and precision-driven balancing algorithms, this balancer ensures accuracy and efficiency.
Features:
Load Cell Technology: The integrated Low Capacity High Accuracy (LCHA) aluminum load cell ensures accuracy down to 0.35g (1/10) and 0.5g (1/8), providing real-time weight data.
Motorized Precision: A built-in stepper motor controlled by PWM signals delivers precise weighing by position, ensuring accuracy and speed.
Precision-driven Balancing Algorithms: Tailored algorithms factor in weight distribution, speed, and performance to achieve optimal balance.
Versatile Compatibility: Compatible with 1/8 and 1/10 RC touring cars, making it suitable for a wide range of enthusiasts.
Effortless Link & App Control: Bluetooth connectivity and the RC Gears app simplify balancing control with real-time data guidance.
Harmony in Motion: Smoothes uneven treads, erasing vibrations for a balanced and stable ride.
2.8’’ TFT Screen: Enhanced viewing experience, even under direct sunlight.
Precision Engineering: Meticulously designed for durability and performance.
Calibration Made Easy: Built-in calibration ensures accurate weight measurements for different models and tire sizes.
Flexible Input Voltage: Compatible with 12~18V input voltage sources, with reverse polarity protection for added safety.
What’s in the Box:
Tire Balancer
1/10 Tire Adapter
Fixture
DC Power Cable
Balancing Putty (10g)
Carrying Case
Instruction Manual
Accessory: 1/8 Tire Adapter (SKU: SK-500045-02)
Specifications:
Size and Weight:
Size: 178(L) x 99(W) x 106(H) mm
Weight: About 800g
Display:
Display Type: 2.8-inch TFT
Display Size: 50 x 69.2 x 2.25mm
TechSpec:
Voltage: DC 12V~18V
Standby Current: ≤70mA
Working Current: 12V/≤750mA, 18V/≤550mA
DC Input Interface: Ø5.5mm DC Jack with I.D 2.5mm pin, inner Positive(+), outer Negative(-).
Working Temperature: 0℃40℃ (32℉104℉)
Working Humidity: 5%-90% (no condensation)
Storage Temperature: -10℃50℃ (14℉122℉)
Storage Humidity: 1%-75% (no condensation)
Upgrade your RC car experience with the SkyRC Digital Tire Balancer, ensuring a smoother and more balanced ride for your RC adventures. Say goodbye to imbalances and hello to precision! Available at Campbelltown Hobbies – your trusted source for RC enthusiasts.
RC cars run off the track, tip over, run with tires wore eccentric from time to time. These are the typical results of incorrect CG(Center of Gravity) due to the unbalanced four wheels. Uneven wheel weight distribution will cause the car to sway more in one direction than others. In this circumstance, the car will run unstable, difficult to control!
Even the slightest difference in weight has a significant difference for RC hobbyists when it comes to the race's performance and the car's condition!
High-quality aluminum with good toughness is selected as the sensor rebound material. Through the rigid and harsh manufacturing process, we created a high-precision I-shaped sensor.
To improve the overall accuracy, the measurement algorithm is enhanced from the predecessor: the precision can be obtained in the shortest time. The default unit is Gram, and switching to Ounce is also available!
When inaccuracy is found, the customized in-app program can get the calibration done quickly by tapping the screen three times.
*Users need to get the 2000g standard weight prepared for calibration
SkyRC smart weighing system is small and portable in size. It can accurately measure the weight distribution at the racing car's four corners. So RC racer can quickly adjust the weight at each corner to the best balance effect and win the race.
The App simulates practical scenarios to b intuitive and straightforward. The diagonal wheels are highlighted contrastingly in orange to indicate the selection. This is exactly the RC hobbyists' paint point when balancing
Watch your Tyre
When it comes to RC racing, so many factors can contribute to the handling and performance of the vehicle.
But one thing we usually pass on is the most obvious on the tires. When looking at a brand-new touring car tire, you’ll see a molding line running right down the center. This line is called the seam, which can cause the car to have inconsistent handling. If you’re looking for every ounce of performance, this seam needs to be removed, so your car is 100% awesome right off the bat!
After removing this seam, most RC touring cars will benefit from a slightly wider and more static tire grip on the track surface, benefiting the turns and reducing rollovers.
The SkyRC LED Pit Light features convenient touch sensitive controls with three color temperature modes and six adjustable brightness / dimming levels.
Incorporating 32 high-powered LED’s using around 11 watts power, the LED Pit Light provides clean, stress-free lighting equivalent to a 100 watt incandescent bulb. The LED technology eliminates the harsh whites of florescent lighting and high-heat commonly associated with close proximity lighting.With an elegant, stylish, foldable and rotatable design, the adjustable joints can be placed in almost any position without tightening or loosening knobs or screws, simply move the light to where you need and the lamp will hold to form.
Touch Control
270° rotation
Max 600 Lumens
